Intercooler piping Q?
#1
Junior Member
Thread Starter
Join Date: May 2002
Location: Montreal, Quebec, Canada
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Intercooler piping Q?
Hi guys, I'm installing junkyard kit with 14B on my 90 civic and I'm wondering about the intercooler piping size and general shape of the pipes.
I've planned to use the DSM pipe leaving the turbo and connect 2" piping to it to a DSM SMIC. I know these pipes are ~1.85", will there be an issue using 2" silicon connectors?
Also, I'm planning on running the charge pipes near the front crossmember/radiator to where the intercooler will sit (resonator box spot), good or bad?
Manifold is STD with BMC adapter plate
Pics/Ideas/Bitching welcome
Vincent
I've planned to use the DSM pipe leaving the turbo and connect 2" piping to it to a DSM SMIC. I know these pipes are ~1.85", will there be an issue using 2" silicon connectors?
Also, I'm planning on running the charge pipes near the front crossmember/radiator to where the intercooler will sit (resonator box spot), good or bad?
Manifold is STD with BMC adapter plate
Pics/Ideas/Bitching welcome
Vincent
Thread
Thread Starter
Forum
Replies
Last Post