Integra GSR Oil Lines
05-21-2012, 04:28 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Integra GSR Oil Lines
I have a Precision/Garrett Hybrid GT3076R Turbo.
Would this setup work:
Inlet:
A -3 size fitting with built in 0.035 restrictor into turbo to -3 AN line to oil pressure Fitting
Outlet:
-10 from drain flange to oil pan.
Would this setup work:
Inlet:
A -3 size fitting with built in 0.035 restrictor into turbo to -3 AN line to oil pressure Fitting
Outlet:
-10 from drain flange to oil pan.
05-21-2012, 04:44 PM
#3
Honda-Tech Member
Thread Starter
Join Date: May 2012
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Re: Integra GSR Oil Lines
Thank you.
Any suggestion for the waterlines?
I have a block to -6AN fitting for one -6 line. Haven't figured out where to tap in for the other line except my old heater core hose. I have no heater core system so it is just looped.
Which one would be inlet and which one outlet?
Any suggestion for the waterlines?
I have a block to -6AN fitting for one -6 line. Haven't figured out where to tap in for the other line except my old heater core hose. I have no heater core system so it is just looped.
Which one would be inlet and which one outlet?
Thread
Thread Starter
Forum
Replies
Last Post