Joel_MN

Guys, im still working on that zex install. Im to the point where i have the intake out, and have drilled a 7/16 hole in it. Now it tells me to install the bulk fitting then the nozzle. Well, the bulk fitting is a brass elbow, with a thin nut for one side, and a hollow like bolt, threaded inside and out, with a hollow head on it. If i install that in the hole i drilled in the intake, then i dont see how the nozzle is gonna fit, since i cant seem to make it fit in the brass fitting.

If anyone has done this, or knows how to do this, please lemme know... Thanks