PrecisionH23a

What else can i say... i installed my 720cc's, paxton FPR, and hondata 4b... and it started RIGHT up. I am amazed, no problems whatsoever other then the 3bar map sensor wiring. To the dyno i go friday, on monday ill share my dyno charts Also, how long does it take for the laptop to connect to the datalogging program? I let it go for about a minute or so and it still was in the process of connecting...


[Modified by GudeH23a, 11:59 PM 9/17/2002]

Firedrake

My laptop connects in like a second, no delay at all.......yeah, hondata is the shiznit, it's too bad they decided to start a "new" product line and a$$rape all the current dealers for another $300.....it's like microsoft entering the import industry
Brian

DR. ON POINT

what did u end up using? a p75??

PrecisionH23a

i ran the p75, no problems at all. I cant get the damn laptop to connect though??? I turned on the lap top, started the car, started hondalogging program, clicked OBD1 ECU, clicked connect and it says connecting for like 3 minutes and never connects???

Hondata

Brian,

What would you suggest we charge?

On the contrary, the Hondata dealers that have purchased a minimum amount of the product from us, purchase this (priced retail at about $1020) for just $300 discount.

There is a new Product line is because there are new features - and at a lower price. This new hardware and software has taken 10 months to produce.

To our friendly mexican terrorist:
Check your serial port settings and make sure you have an interface box labelled 4b.

R Kincaid

hehe

Firedrake

I actually take back my previous statement now that I read the site closer I thought you were charging the $300 for a simple software upgrade to V3, but then I realized that it included a new box for the s200.....I read this........

Hondata dealers are defined as having sold more than 5 units or having purchased a stage 4 with boost system after 1st July 2002. For an upgrade fee of $300 Hondata will provide:

A new s200 system with boost and datalogging.
ROM Editor V3
HondaLogger V3 registration to datalog all s200 systems.
The dealer must keep their Stage 4 system to tune Stage 2/3/4 systems for existing customers.

......And didn't think that the "new s200 system" meant an entire new interface box....so anyways on me You'll be getting our $300 in the next couple weeks....

I have a friend who just got a stage 4 system recently, and got an email from him that was very bitter about just having bought his system and now a new one is available.......apparently he called 2 months ago to order and was informed by someone over there at hondata that no new systems were going to be released for a while, and that if they were the upgrade would be free.....so he's pretty annoyed that now 2 months later it's going to cost him $300 to upgrade.....maybe I should tell him to call you and work something out?
Brian

Dublocivic

Doug,
Do you see the Hondata system ever being able to support more than 29lbs? I want to run the stg4 but I was curious if the Hondata team has looked into possibly increasing the boost capability with corresponding fuel columns..?
Thanks!

Anubyss

Can you verify that the upgrade for the users will be $175 for 2b users regardless of how old the unit is? Or is it just for users with the second generation 2b models? Thanks.

Hondata

For any stage 2 owner. As far as boost pressure, we have had no requests for more than 29. We could do it but I doubt it would sell enough to justify our time.


[Modified by Hondata, 12:43 PM 9/18/2002]

KCHybrid

What would it cost me to upgrade from my 2b to an s200 that is the equvolant of a 4b?

Dublocivic

Ok say I was to use the stg4 like I have planned and I was in need of more than 29lbs (I dont think I will) but if I was to, this would be a possibility then?

Thanks Doug