how much boost on stock internals??(d15b7)
#1
Thread Starter
Join Date: Sep 2005
Location: ar, usa
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
how much boost on stock internals??(d15b7)
im wanting to do a little turbo setup ive got everything except for turbo and flanges to weld on my tubular manifold. so my question is what boost is "safe" to run on a stock d15b7 without blowing it in a fuc'king week or a month. thanks in advance for the help.
#2
Junior Member
Join Date: Sep 2004
Location: Columbus, Ohio
Posts: 628
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much boost on stock internals??(d15b7) (Sci_v_icI)
just boosted my d15b7 a few months ago. 13b turbo, hf manifold, 450's, some old saab ic or something, hondata s200...blah blah blah. i just used whatever the turbo was internally gated at. like 8 psi or 8.5 or something, i dont even have a boost gauge so i dont know for sure. i just have the who the hell cares if it blows up mentality...have fun with things
#3
Member
Join Date: Aug 2001
Location: Baltimore, maryland, usa
Posts: 5,084
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much boost on stock internals??(d15b7) (Sci_v_icI)
PSI doesnt matter, its the amount of power your putting out.. 10 psi on one turbo is not the same as 10psi from another..
#5
Member
Join Date: Aug 2001
Location: Baltimore, maryland, usa
Posts: 5,084
Likes: 0
Received 0 Likes
on
0 Posts
Re: (nonvtecD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nonvtecD »</TD></TR><TR><TD CLASS="quote">I wouldnt run much over 200 hp on the D15, but it has been done.</TD></TR></TABLE>
I wouldnt even go over 180whp with it..
I wouldnt even go over 180whp with it..
#6
Honda-Tech Member
Join Date: Sep 2003
Location: Watertown, CT, USA
Posts: 1,734
Likes: 0
Received 0 Likes
on
0 Posts
I ran my turbo b7 pretty hard, up to like 12 psi sometimes on a 48/60 T3, that's gotta be pushing 200 hp. Rods never went which is what you would expect, my rings just got tired and I pulled it while it was still running.
#7
Member
Join Date: Aug 2001
Location: Baltimore, maryland, usa
Posts: 5,084
Likes: 0
Received 0 Likes
on
0 Posts
Re: (nonvtecD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nonvtecD »</TD></TR><TR><TD CLASS="quote">I ran my turbo b7 pretty hard, up to like 12 psi sometimes on a 48/60 T3, that's gotta be pushing 200 hp. Rods never went which is what you would expect, my rings just got tired and I pulled it while it was still running. </TD></TR></TABLE>
Luck and a good tune..
Luck and a good tune..
Trending Topics
#9
Honda-Tech Member
Join Date: Sep 2003
Location: Watertown, CT, USA
Posts: 1,734
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Sci_v_icI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sci_v_icI »</TD></TR><TR><TD CLASS="quote">o i wasnt even looking at getting 180 just abuot 150-170</TD></TR></TABLE>
you'll be fine
you'll be fine
Thread
Thread Starter
Forum
Replies
Last Post
jdjustme
Forced Induction
20
03-09-2007 01:05 PM
Which one will be more dangerous for stock internals? small turbo high psi / big turbo low psi? or h
elpiar
Forced Induction
4
08-04-2005 01:52 PM