holly crap, i hit 9500 rpm on stock valve train
#1
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2002
Location: Carlisle, PA, usa
Posts: 1,534
Likes: 0
Received 0 Likes
on
0 Posts
holly crap, i hit 9500 rpm on stock valve train
i installed a chip with 9500 red line but i also have MSD 6-BTM with a 8k pill in it. i sprayed my engine down serveral weeks ago and water corroded the conection on the pill. i did a burn out in front of my friends house last night and when i got about 2 blocks away, i looked at my avcr and the rpm peak hold showed 9485 rpm. i was about to **** in my pants. i pulled the car over right away and let it idle to see if i could hear anything different. it didnt't sound any diferent at all, so i got home and did a compression check and everything was fine. so i took the car out and to see if it was a glitch or something, but i was able to go pass 8k again. so i figured out it was the bad connection in the msd pill. i guess i lucked out this time. i wonder how long the engine could stay at 9500 rpm before the valves start floading on stock valve train.
Thread
Thread Starter
Forum
Replies
Last Post
Ri5e
Acura Integra
11
02-09-2002 08:31 PM