bambooluv

Hey Viren well Im ready to get a tilton from you I know that the group buy is over but Im willing to pay full price . Also just a couple of question on the chassis , can you run a straight axle setup in the rear if you still have the factory mounting positions for the shocks , I recently saw the mmr http://www.mmrusa.com/rearaxle.htm units and they look very nice . Also can you get any of the rpm products (rells performance motorsports) just let me know sorry been gone so long away from the board been in egypt and central asia for a while for work but the car is almost complete and pics will be up in about a weeks time guys-Pdang


[Modified by bambooluv, 8:49 AM 7/11/2002]

GSRgrrl

The Instant Message feature is wonderful here!

bambooluv

Snafu-Si

Viren helped me Immensely when I "IM" him about piping, and custom piping, and coating piping, and more piping. Very nice of him to hlep me out. he didn't have to but he spent time answer a lot of questions.

ninesecrx

The straight back axle is illegal in hotrod class and I think rpm.....willie rells went out of bussiness. If anyone knows how to get into contact with them, let me know because I had a question for them too. Their website is gone and their phone number doesnt work.

Arturbo

Mike, we were gonna buy the front end from them but they are no longer to be around. Funny thing was that they bragged how long they had been doing suspesion and chasis, and now they are no where to be found. Im sure somebody has some info where they might be.

art

bambooluv

I appreciate the help guys yeah i was affraid the straight axle setup would leave me in outlaw similar to carboy racing out here in Texas . Any one know of a rear end setup besides that of mmr or nuformz , also can anyone here even get the nuformz one I heard it cost an arm and a leg . Last one guys who around the Houston area can fab whellie bars Im kinnda hesitant to send it to someone that I dont really know or trust . And who can tune Motec ? Thanks guys -Pdang


I also already im'd viren its just that I just got back to the states today and Im staying in cali for a week before headinh home and ws just to antsy . I just had to ask at this bizzare hour . Man there is no place like home.Pdang


[Modified by bambooluv, 9:44 AM 7/11/2002]

ninesecrx

Yeah...thats why I needed to get a hold of them. I wanted to switch to one of their front ends...I thought that kenny tran just got one and the deep stage car did as well? Its sad cuss they were the ones who built Dave Shihs tube fram chassis...I think that was the first of its kind. Does everyone remember the silver bullet?

ninesecrx

Ohhh, I can get the newformz setup since I live here in sunny so cal. I have seen all the parts it comes with and even seen it on a car. Pretty nice stuff. The only thing I thought was funny was that Shaun put his name on the brake caliper and covered the other name......Mike

Arturbo

Who can forget the Silver bullit? For a rear suspension try contacting nuformz or Shawn Carlson.

art

bambooluv

thanks for all the help guys any contact numbers for nuformz or shawnn ? Im also in so cal right now , just got back from japan this afternoon and will be heading back to Houston in a weeks time or so. But whille im here it would be nice to visit some shops and or nuformz if near the riverside or La area . Mike how much can you get it for (is the mmr non straight axle any good?) thanks guys-Pdang

ninesecrx

The MB back suspension looks ok to me...although to be honest, I dont know how good at the suspension thing those guys are. I think Mike Carl runs it in his car and seems to like it. Yeah...give Shaun a call him self (dont have the number) or Dynamic Auto Sports. They are a big supplier of Newformz stuff and they have the whole kit in stock as well as having a integra there with the kit on it. Their number is 949-457-1234.

turbo Si

AGAIN.........what happened to the Lexus? Sometimes times I don't understand you!

b18bturbo

the kit from nuformz is like 3600 its very nice peice drops around 85lbs.

I have the rpm rear suspension as well as there doors carbon fiber now but still havent installed them. The RPM guys are stil laround but its very hard to g et ahold of them. I have there numbere that works but still its like once in while when you call you get message other times just rings and rings...

Dublocivic

David's car was the shiet with a 10.86@136 back in the day..

TurboDANDEE

Pdang, call me u ******!! i didnt know u came back to the states? well, my pistons came in and i sent my block to the machine shop, speedpro should be here friday. My car should be back and running hopefully at the end of this month. Holla at me when u see this, peace.

FB in SA

Regarding the Motec tuning. Norwood up in Dallas can do it for you.

http://www.bobnorwood.com/

bambooluv

once again thanks for the help guys I'll try giving then a call later this afternoon .
Thats just really bad news about rpm I thought they had a realy solid company but that just goes to show you , you never really now much about a company till shiet hits the fan .

b18bturbo

yup he is now tuning kenny trans car

turbo Si

I heard Bryan from PYR and Kenny Tran took a loss on RPM. They are in San Diego right. I heard they shut down and did'nt notify anyone!

Doodoo

One of you jisatsu fools come pick me up so I can put my motor back in my crx!!

bambooluv

Well thanks for all the help guys when i went to jg today i ended up getting the motec system instead of the aem ( thanks though for the info viren ) I still need the clutch ill most likly call you early next week for it when i get back to houston.
i also need a tial 46mm wastegate and bov if you can get them for me viren .-Pdang

b18bturbo

got that just let me know

turbo Si

BALLA!!!!!