HELP: Problems w/ Greddy Profec type s B/C
Thread Starter
Junior Member
Joined: Jan 2002
Posts: 137
Likes: 0
From: WI
HELP: Problems w/ Greddy Profec type s B/C
I just installed the Greddy Profec type s...with the two boost dails set all the way down, I'm hitting 10 pounds of boost with low boost setting...I've tried adjusting the gain **** but I'm still hitting high boost...I just wanna hit 7 pounds for now with the FMU...with the bc off I'm hitting 5 pounds...
Set up:
Peakboost kit
FMU(hondata waiting to go in)
ARP headstuds
ACT XTSS clutch
Basically stock motor
I'm running a hose from the top of the wastegate(tial) to the COM port
on the valve unit and a hose from the NC to the intake manifold for vacuum.
Set up:
Peakboost kit
FMU(hondata waiting to go in)
ARP headstuds
ACT XTSS clutch
Basically stock motor
I'm running a hose from the top of the wastegate(tial) to the COM port
on the valve unit and a hose from the NC to the intake manifold for vacuum.
Thread
Thread Starter
Forum
Replies
Last Post
