Help Me Out I Need the following pics: H22, D16, B16 4-1 turbo manifolds w/measuring....just read th
10-28-2004, 09:50 AM
#1
at the jetties fishin'
Thread Starter
Help Me Out: Need following: H22, D16, B16 4-1 manifold pics w/measurements...aw just read
sorry, realized that was a stupid post title.
I know there's tons of guys on here with a manifold or two laying around waiting to be installed.
What I need is for you guys to take a pic or two of your manifold AT the header mounting flange with a ruler going across it completely and with a ruler going up against it. I basically need to see the spacing of the runners at the header flange and the size dimensions of the ports. I can get approximates with this method.
I need one for a D16, an H22, and a Bseries something or another.
I'm trying to find a manifold similar enough to my needs that I can order an el cheapo version from ebay and hack off the flange and weld on my volvo flange and then send it off to have a nice sturdy one made...or just brace the hell out of my el cheapo...
oh and in case anyone was wondering this is going on a volvo headed ford 2.3 turbo engine. I call it frankenford
It just looks from the gaskets I've matched at the parts store that any of the normal honda manifolds "could" work but I know flange size and actual port angle, etc are different....that's why I'd like these pics.
thanks for any help guys.
I know there's tons of guys on here with a manifold or two laying around waiting to be installed.
What I need is for you guys to take a pic or two of your manifold AT the header mounting flange with a ruler going across it completely and with a ruler going up against it. I basically need to see the spacing of the runners at the header flange and the size dimensions of the ports. I can get approximates with this method.
I need one for a D16, an H22, and a Bseries something or another.
I'm trying to find a manifold similar enough to my needs that I can order an el cheapo version from ebay and hack off the flange and weld on my volvo flange and then send it off to have a nice sturdy one made...or just brace the hell out of my el cheapo...
oh and in case anyone was wondering this is going on a volvo headed ford 2.3 turbo engine. I call it frankenford
It just looks from the gaskets I've matched at the parts store that any of the normal honda manifolds "could" work but I know flange size and actual port angle, etc are different....that's why I'd like these pics.
thanks for any help guys.
Thread
Thread Starter
Forum
Replies
Last Post
h22_crx
Welding / Fabrication
13
08-11-2011 01:02 AM