help with crower LS DUAL SPRING & TI RETAINERS with turbo 402T cams ..
10-27-2003, 07:01 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2003
Location: Gbg, Pa, USA
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
help with crower LS DUAL SPRING & TI RETAINERS with turbo 402T cams ..
im looking to build my crv over this spring and i want to tach around 8500-8800 
without the addition of a vtec head will these springs and retainers hold up to that high of a rev for racing , street driving will have a lower rev limit. For now i just want to see what i can do without vtec before i build up a vtec head . thanks for you opinions or facts on the crower equipment
without the addition of a vtec head will these springs and retainers hold up to that high of a rev for racing , street driving will have a lower rev limit. For now i just want to see what i can do without vtec before i build up a vtec head . thanks for you opinions or facts on the crower equipment
10-27-2003, 09:08 AM
#2
Honda-Tech Member
Join Date: Apr 2003
Location: Chester, MD
Posts: 1,711
Likes: 0
Received 0 Likes
on
0 Posts
Re: help with crower LS DUAL SPRING & TI RETAINERS with turbo 402T cams .. (b20turboic)
I'm not really sure of the crv r/s ratio but I would think it would be kinda **** poor to be shooting for that high. I might be wrong but I would think an RPM of 8000-8500 would be about what you could push it to safely.
Thread
Thread Starter
Forum
Replies
Last Post