head?
#3
Honda-Tech Member
Join Date: Feb 2007
Location: fl, usa
Posts: 3,211
Likes: 0
Received 0 Likes
on
0 Posts
Re: head? (Topdawgg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Topdawgg »</TD></TR><TR><TD CLASS="quote">Just payed 500 CDN for all that work... Local guy here, has been specialising in head work for 20 years..</TD></TR></TABLE>
really now i might hafta talk to you about sending you my head for him to do some work on
really now i might hafta talk to you about sending you my head for him to do some work on
#4
Honda-Tech Member
Join Date: Nov 2004
Location: Shoreline, Wa, 98155
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Re: head? (tony413)
Well I have a headgames NJ built street head and the work and the guts comes out to about 2 g's.
His honda-tech name is HEAD, dave is his real name
His honda-tech name is HEAD, dave is his real name
#5
Re: head? (TheThiefTheKnife'NTheGun)
https://honda-tech.com/zerothread?id=1943297&page=2
check out my head thread in my sig, local guy in san diego. as far as big names- RLZ, portflow and headgames take the cake imo..
i paid about $700 for:
oversize valve fitment
stage 3 port and polish
5 angle valve job
line honing the cam caps
removal of imperfections and smoothing bowels
hot tanking
milling .10
tapping head for ls vtec
port matching intake manifold to head
and opening throttle body to 72mm
check out my head thread in my sig, local guy in san diego. as far as big names- RLZ, portflow and headgames take the cake imo..
i paid about $700 for:
oversize valve fitment
stage 3 port and polish
5 angle valve job
line honing the cam caps
removal of imperfections and smoothing bowels
hot tanking
milling .10
tapping head for ls vtec
port matching intake manifold to head
and opening throttle body to 72mm
Thread
Thread Starter
Forum
Replies
Last Post