how much psi or hp is safe on stock GSR sleeves???? Ill have plenty of fuel, low comp. pistons, a good set of rods and hondata... any other suggestions appreciated....

 

people say with stock sleeves uo to close to 600 or so is safe.

I wouldnt try maxing it...
I am consdering getting them for my 400 whp build.

 

i wasnt expecting 600whp... i was thinking more like 300 ~ 400whp????

 

bump

 

What size turbo are you running ? What hp goals do you have in mind ? You should be fine at 300hp

 

T3/T4 .57 trim Turbonetics or Garrett t3/t4 .50 a/r in and .63 a/r ex... I was hoping 300 to 400whp... but doing a little research so i dont explode my first turbo motor

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4CDFED &raquo;</TD></TR><TR><TD CLASS="quote">T3/T4 .57 trim Turbonetics or Garrett t3/t4 .50 a/r in and .63 a/r ex... I was hoping 300 to 400whp... but doing a little research so i dont explode my first turbo motor </TD></TR></TABLE>

You will be fine, we made 300hp on 7psi on a log manifold, on a gsr.

http://www.rcautoworks.com/AndysCar.htm

 

stock GSR motor???

 

You will get 300 fine assuming your tuning is good