got my new downpipe made, courtesy of slick motorsports

its so purty

bad pic, but deal with it

look at those welds

 

ugh

 

nice welds

 

thanks for the resize. i edited the 1st post

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by abmerop18 &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>


it looks like your returne line touching your downpipe.... thats a big no no.

 

i thought you were supposed to keep the return lin short and no no touchin the dp even if it's stainless

 

nice downpipe sorry to be off topic, but what if the oil feed line is touching the downpipe?

 

nah, it doesnt touch the downpipe, it goes around.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by abmerop18 &raquo;</TD></TR><TR><TD CLASS="quote">nah, it doesnt touch the downpipe, it goes around.</TD></TR></TABLE>


sweet

 

heat wrap your oil return line of just get some insulation just in case . Tose welds look great though

 

looks like a very well fabricated downpipe.
wrap it just to be safe and use an insulation on the oil return...it really helps if theres any problems...im telling you first hand

 

that dp looks sooo good

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91integraLSVTEC &raquo;</TD></TR><TR><TD CLASS="quote">nice downpipe sorry to be off topic, but what if the oil feed line is touching the downpipe?</TD></TR></TABLE>

If your oil feed line is touching your downpipe you have some serious issues with placement of lines. Downpipe are under a motor, feed lines are above the motor haha.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dunc &raquo;</TD></TR><TR><TD CLASS="quote">If your oil feed line is touching your downpipe you have some serious issues with placement of lines. Downpipe are under a motor, feed lines are above the motor haha.</TD></TR></TABLE>
for sure

 

Looks good

 

nice down pipe...who made it? looks like a BMC down pipe

 

nice , how much did it cost?

 

looks pretty sweet

 

yeah id like more info on it too please, im definitely interested!!

 

it is a custom stainless steel 2.5" downpipe made by a local shop. it is a full downpipe with flex pipe and all. cost me $250

 

i wish my DP welds were that nice... looks good