Full Race has been busy! (Full Race/Leone Racing 2000 Civic Si, Garrett Supra, S14, S2000, K series)
#1
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: FULL RACE, AZ, USA
Posts: 4,719
Likes: 0
Received 0 Likes
on
0 Posts
Full Race has been busy! (Full Race/Leone Racing 2000 Civic Si, Garrett Supra, S14, S2000, K series)
As requested here are some pics of our latest projects
Our Full Race HotRod/Pro 4 Cyl 2000 Civic Si
Cromoly SFI 25.5 backhalf tube chassis. Stock A/B pillars, factory firewall, solid axle (only 36 lbs), custom fabricated lift spindles, full race air to water heat exchanger contained in one aluminum box, this car also uses our strip bar radius arm suspension geometry.
more pics in the gallery at:
http://www.full-race.com/images/gallery/race_car_2/
Garrett/Honeywell Supra with full race manifold/4" dp. Currently a stock motor, but a built motor is sitting on an engine stand waiting to go in and make some real power. It has a built head, AEM EMS, 96 lb/hr injectors, HKS GT2 60mm gate, GT42R with custom/one-off compressor cover, CHRA and Turbine housing
gallery at:
http://www.full-race.com/images/gallery/Supra/
Full Race S14. This is actually my father's car. S14 with S15 front, S13 highport redtop, custom raychem milspec wiring by estevan from enjuku, 72 lb/hr injectors, temporary chipped ecu setup for a z32 maf/760s (awaiting the real fuel system), dual walbro 255s, HKS Drag coil overs, full race t3t67 sr20det kit. btw this whole car was built for under $5000.
gallery at:
http://www.full-race.com/images/gallery/s14/
Full Race S2000
This is the car that did 518 on 93 octane pump gas. It was displayed in the super street/turbo booth at SEMA IAS. Stock head, sleeved block with pauter rods, cp pistons and a cometic HG. Stock cams, intak emanifold, etc (for now). It will be going on a race gas dyno run very shortly, and should really be able to test the ultimate output of our t3t67.
gallery at:
http://www.full-race.com/images/gallery/s2k/
and most have seen the Full Race / Hasport 1998 K series powered hatch, but ill post it anyway
gallery at
http://www.full-race.com/images/gallery/kswap/
thanks for looking, and please be respectful. If you dont like our cars, keep it to yourself. happy memorial day
Modified by Full-Race Geoff at 5:27 PM 5/31/2004
Our Full Race HotRod/Pro 4 Cyl 2000 Civic Si
Cromoly SFI 25.5 backhalf tube chassis. Stock A/B pillars, factory firewall, solid axle (only 36 lbs), custom fabricated lift spindles, full race air to water heat exchanger contained in one aluminum box, this car also uses our strip bar radius arm suspension geometry.
more pics in the gallery at:
http://www.full-race.com/images/gallery/race_car_2/
Garrett/Honeywell Supra with full race manifold/4" dp. Currently a stock motor, but a built motor is sitting on an engine stand waiting to go in and make some real power. It has a built head, AEM EMS, 96 lb/hr injectors, HKS GT2 60mm gate, GT42R with custom/one-off compressor cover, CHRA and Turbine housing
gallery at:
http://www.full-race.com/images/gallery/Supra/
Full Race S14. This is actually my father's car. S14 with S15 front, S13 highport redtop, custom raychem milspec wiring by estevan from enjuku, 72 lb/hr injectors, temporary chipped ecu setup for a z32 maf/760s (awaiting the real fuel system), dual walbro 255s, HKS Drag coil overs, full race t3t67 sr20det kit. btw this whole car was built for under $5000.
gallery at:
http://www.full-race.com/images/gallery/s14/
Full Race S2000
This is the car that did 518 on 93 octane pump gas. It was displayed in the super street/turbo booth at SEMA IAS. Stock head, sleeved block with pauter rods, cp pistons and a cometic HG. Stock cams, intak emanifold, etc (for now). It will be going on a race gas dyno run very shortly, and should really be able to test the ultimate output of our t3t67.
gallery at:
http://www.full-race.com/images/gallery/s2k/
and most have seen the Full Race / Hasport 1998 K series powered hatch, but ill post it anyway
gallery at
http://www.full-race.com/images/gallery/kswap/
thanks for looking, and please be respectful. If you dont like our cars, keep it to yourself. happy memorial day
Modified by Full-Race Geoff at 5:27 PM 5/31/2004
Trending Topics
#9
Honda-Tech Member
Join Date: Jan 2002
Location: Chandler., Arizona
Posts: 9,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full Race has been busy! (Full-Race Geoff)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Full-Race Geoff »</TD></TR><TR><TD CLASS="quote">
Our Full Race HotRod/Pro 4 Cyl 2000 Civic Si
Cromoly SFI 25.5 backhalf tube chassis. Stock A/B pillars, factory firewall, solid axle (only 36 lbs), custom fabricated lift spindles, full race air to water heat exchanger contained in one aluminum box, this car also uses our strip bar radius arm suspension geometry.
</TD></TR></TABLE>
this civic was black before, right? or am i thinking of a different one?
anyway, incredible **** as usual!
Our Full Race HotRod/Pro 4 Cyl 2000 Civic Si
Cromoly SFI 25.5 backhalf tube chassis. Stock A/B pillars, factory firewall, solid axle (only 36 lbs), custom fabricated lift spindles, full race air to water heat exchanger contained in one aluminum box, this car also uses our strip bar radius arm suspension geometry.
</TD></TR></TABLE>
this civic was black before, right? or am i thinking of a different one?
anyway, incredible **** as usual!
#12
Honda-Tech Member
Join Date: Apr 2003
Location: Englishtown, NJ
Posts: 592
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full Race has been busy! (tegedrex)
damn geoff... every car that comes out of your place looks amazing... i hope i can do some work with you in the future... so what's next on the agenda?? haha... i cant believe that's your dads car... awesome...
#15
Honda-Tech Member
Join Date: Jan 2002
Location: Chandler., Arizona
Posts: 9,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full Race has been busy! (Full-Race Geoff)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Full-Race Geoff »</TD></TR><TR><TD CLASS="quote">yeah she got a paint job </TD></TR></TABLE>
looks great last time i saw it, was at the "older" shop, when it was still black and i think you guys were just finishing up, or had just finished up the cage. looks like a ******* jungle gym inside!
looks great last time i saw it, was at the "older" shop, when it was still black and i think you guys were just finishing up, or had just finished up the cage. looks like a ******* jungle gym inside!
#18
threes
Join Date: Nov 2003
Location: Hot Hot heat, AZ
Posts: 2,485
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full Race has been busy! (Full-Race Geoff)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FredoSP »</TD></TR><TR><TD CLASS="quote">you guys are hard workers </TD></TR></TABLE>
best comment.
best comment.
#23
Honda-Tech Member
Join Date: Jul 2002
Location: phoenix, az
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full Race has been busy! (Full-Race Geoff)
geoff you guys have done a great job on the coupe since idrc here in phoenix.looks like a completely different car.all i have to say is good luck on all of the projects you got going on now.
#24
I live under a rock
Join Date: Apr 2003
Location: Purple Prelude, DE
Posts: 11,107
Likes: 0
Received 0 Likes
on
0 Posts
Re: Full Race has been busy! (lsvtec-crx)
at least u can call the impo team a team now......... back in the day it was sav, and whoever could make it to the race that weekend......