Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside
#1
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Dirty 3rd, Tx, USA
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside
I started this turbo setup on newyears eve finished 3 days ago and was on fmu. Got my hands on AEM went to dyno stock honda map sensor and .6 bar spring in tial wastegate. Boost checked in at 9psi. First pass was 303 that was with the basemap made before the dyno. When all tuned the car hit 347hp at 9psi to the wheels conservative tune
Setup Built and TUNED By INLINE RACING Houston, TX
Golden Eagle Sleeved b18c block
Je pistons 81.5mm flattop
Eagle Rods
Inline Racing ported head, springs, retainers
Type R intake manifold.
B&M Regulator set a 40psi
Inline Racing custom intercooler piping
Inline Racing log manifold
Garrett 60-1 4inch inlet
Tial 40mm wastegate .6bar spring
Stock Honda map sensor
Venom 660 cc injectors
Stock valves
Clutchmasters twin disk kevlar
Type R diff/GSR Tranny
ARP headstuds
Pics and Graph
Spilled some water oops
Setup Built and TUNED By INLINE RACING Houston, TX
Golden Eagle Sleeved b18c block
Je pistons 81.5mm flattop
Eagle Rods
Inline Racing ported head, springs, retainers
Type R intake manifold.
B&M Regulator set a 40psi
Inline Racing custom intercooler piping
Inline Racing log manifold
Garrett 60-1 4inch inlet
Tial 40mm wastegate .6bar spring
Stock Honda map sensor
Venom 660 cc injectors
Stock valves
Clutchmasters twin disk kevlar
Type R diff/GSR Tranny
ARP headstuds
Pics and Graph
Spilled some water oops
#4
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Dirty 3rd, Tx, USA
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
nah imma keep the stock map for a while, Til I save some just in case money. The air/fuel was between 11.8 and 12.0 though so I should be alright
#7
Honda-Tech Member
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (mchuang)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mchuang »</TD></TR><TR><TD CLASS="quote">
Spilled some water oops
</TD></TR></TABLE>
Water? Riiiiiiiiiiiiight. Little happy to see the dyno sheet?
Spilled some water oops
</TD></TR></TABLE>
Water? Riiiiiiiiiiiiight. Little happy to see the dyno sheet?
Trending Topics
#8
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (nsxmatt)
I'd say it was his drool that's on the chart. He was drooling because of the #'s....lol...
#12
Honda-Tech Member
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (SE-Rawkus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SE-Rawkus »</TD></TR><TR><TD CLASS="quote">Nice #s....but...where is the TQ??? </TD></TR></TABLE>
What is a street tire FWD need with more TQ?
What is a street tire FWD need with more TQ?
#13
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (SE-Rawkus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SE-Rawkus »</TD></TR><TR><TD CLASS="quote">Nice #s....but...where is the TQ??? </TD></TR></TABLE>
it's low boost...need more boost before the torque will go up.
it's low boost...need more boost before the torque will go up.
#14
Honda-Tech Member
Join Date: Nov 2002
Location: USA
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (mchuang)
Great number! Looks like a fun car to drive. Good power on 9psi..
OT: How come everyone always has a conservative tune?????
OT: How come everyone always has a conservative tune?????
#16
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (SE-Rawkus)
great numbers, i plan on running an almost identical setup, similar mani, bigger bore. How do you like the 60-1?
#17
Honda-Tech Member
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (wantboost)
I don't get it...the whp is so high, but why are the torque numbers so low?
Khoi
Khoi
#19
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Dirty 3rd, Tx, USA
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (racinskittle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racinskittle »</TD></TR><TR><TD CLASS="quote">Great number! Looks like a fun car to drive. Good power on 9psi..
OT: How come everyone always has a conservative tune????? </TD></TR></TABLE>
The reason I say conservative is because I made 347 but he backed off timing a lil bit so I wouldnt blow it up as easy lol. And he richened it up so that the air/fuel is between 11.5 and 12.0 instead of 12.5 where I made 347
OT: How come everyone always has a conservative tune????? </TD></TR></TABLE>
The reason I say conservative is because I made 347 but he backed off timing a lil bit so I wouldnt blow it up as easy lol. And he richened it up so that the air/fuel is between 11.5 and 12.0 instead of 12.5 where I made 347
#21
Honda-Tech Member
Join Date: May 2003
Location: USA
Posts: 1,370
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (mchuang)
can i ask why you decided to go with the FMU in the first place?
nice numbers tho
nice numbers tho
#22
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Dirty 3rd, Tx, USA
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (buda18)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by buda18 »</TD></TR><TR><TD CLASS="quote">can i ask why you decided to go with the FMU in the first place?
nice numbers tho</TD></TR></TABLE>
Dont ask that question lol you know how it is. You just wanna get boostin right away and cant wait. I had already ordered the AEM just was waitin for it and today was my lucky day. Besides you gotta crawl before you walk
nice numbers tho</TD></TR></TABLE>
Dont ask that question lol you know how it is. You just wanna get boostin right away and cant wait. I had already ordered the AEM just was waitin for it and today was my lucky day. Besides you gotta crawl before you walk
#25
Junior Member
Thread Starter
Join Date: Feb 2004
Location: Dirty 3rd, Tx, USA
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fixed problem,Ditched FMU, Got AEM, 344hp at 9psi Pics and Graph Inside (Sinitron)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sinitron »</TD></TR><TR><TD CLASS="quote">AEM EMS </TD></TR></TABLE>
Yea that new software they have is pretty dam awesome. It even lets you suggest the injector manufacturer.
Yea that new software they have is pretty dam awesome. It even lets you suggest the injector manufacturer.