Well here is the first piece that I bought for the new setup...

http://f1.pg.photos.yahoo.com/...iew=t

 

...

 

thats the first thing i would buy.................(this many dots indicates sarcasm)

 

More pictures crackuh

 

More pics are here....http://f1.pg.photos.yahoo.com/ph/bul...c=ph%26.view=t

Sarcasm was needed......I am actual in the process of doing my rebuild. I did the Greddy TD05-18G turbo thing and made good power with that......sold everything to settle down with my girl and get a big screen and nice **** for the apartment......was going to go NA and bought this, but realized I miss boost way too much so boost it is! But hey it's a start right?

 

It's a good start IMO. Where are you going with this build?

 

Going to either go with a sleeved LS/GSR block or going to get a darton block. After building the block with Arias 9.5:1 pistons/crower rods and a few basic upgrades on the motor I am going to be going with the Precision SC44 turbo. Going to get the HKS SS BOV, Tial 38MM w/ 9 lb spring Wastegate, Inline Pro Manifold, 720 or 780cc injectors, Hondata s200b, AVC-R Boost controller, not sure what turbo timer, Greddy gauges, not sure on what type intercooler (debating), 3" thermal exhaust, 3" downpipe, 3" testpipe........all in the works...hopefully will be done by April or so. Not in a rush to do it, just want to do it right

I made the mistake with my previous turbo setup (Greddy TD05-18G on b16a2) and I rushed into doing it. While I made good power on that setup (258hp & 201 ftlbs @ 10psi---274hp & 218 ftlbs @ 13psi) with JE 9.1:1 pistons/eagle h-beam rods, ARP head studs, RC440 injectors, and Greddy E-Manage.....wish I would have done some other small things, but hey....now I can go for more power...