markaria

Went up to payn tech, (tom ) and i am happy with the results:
heres my set up
jdm b16 (stock block)
b18c5 head/intake manifold
ctr cams
(about 10.4 c/r)
sfp manifold
t3/t4 .48/.60
hks wastegate (7 psi spring-no bc yet...)
blitz dd bov
pwr intercooler/custom piping/downpipe (2.5")
rc sturated 550's
hondata s100b
aem fuel rail/regulator
walbro 255 in tank

gsr tranny
quaife

...she put down 216.7 hp and 141 ftlbs on 7psi on a mustang dyno with a conservative tune (4th gear pulls)

And let me say that my first turbocharged honda driving impressions today were WOW. I wasn't expecting pull like this (especially in 4th and 5th).
kudos to all that helped @ showdown motorsports (Toledo, OH) for the install, Tom up at Payn for the tuning, and all the members of this board for various parts.
finally boosted...

11psiTurboSI

Nice #'s

redboost10

hows your fuel set up? what duty cycle are those injectors at? i will also be running aem rail fpr, walboro 255, and rc 550cc. im just curious how much hp this fuel set up is good for with hondata s200b

markaria

I honestly don't know what duty cycle the 550's are at, but I'm most definitely enjoying the car's new personality! I am pretty sure that without getting crazy with the fuel pressure and a well tuned hondata 300-350 would be possible

quickergixxer

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tgh99si &raquo;</TD></TR><TR><TD CLASS="quote"> im just curious how much hp this fuel set up is good for with hondata s200b</TD></TR></TABLE>

xtrdac is running 550's and he has ran 28-69 psi on race gas 400whp and runs 19 on pump just some info for ya

setup sound vnice i wish i had a lsd

markaria

Thanks, the quaife is awesome. I highly suggest getting one. I honestly have no clue how some of you boosted hondas guys (and gals) run on an open differential!


Modified by markaria at 5:56 PM 2/3/2004

quickergixxer

when payn tuned your car do they do it all on the dyno? how much did it cost?

B18bEK

sweet, get a boost controller and make more power !!

markaria

it was all done on the dyno and he charges $165/hr... My total was about $285

markaria

any regular maintenance tips from those that have been boosting their honda for a while?

951

another 944 owner...nice. and its an 87 no less, color?

Turboteggy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by markaria &raquo;</TD></TR><TR><TD CLASS="quote">
And let me say that my first turbocharged honda driving impressions today were WOW. I wasn't expecting pull like this (especially in 4th and 5th).
</TD></TR></TABLE>

That's cause you've been driving slow-*** porches for too long..... j/k

markaria

mine is black

J.R.

boostin ownz!!!

markaria

any other relatively mild b16 turbo dyno #'s out there?

JDogg

stock b16, crower turbo cams and valve train, jg intake mani, overblown turbo mani, sc61, 880cc injectors, aem ems.

300hp, 188tq, 9000 rpms, 8psi

phiberoptik

were you pleased with the trip to payne? right now it looks like that is where Ill be going to get tuned. I havent seen alot of big number tunes from them. very conservative just from the few I have seen (you, g2turbo, GITWIDIT). how conservative was your tune?

btw Im from Defiance OH... NW Ohio w00t w00t

markaria

under boost a/f was well under 12 through redline. Overall I was pretty satisfied with the experience. Oh, btw I have family in the defiance area

b16hybridsol

hey, i'm out of findlay ohio, just got my turbo for my h22 teg, i'm about to get hondata, i was going to wait for dpr to get their dyno, but where is payn tech at, i've heard of it, but i can' tthink of where its at

SpoolnG2

Its up in Troy Michigan

This summer i'll be heading up there for tuning also. I've heard nothing but good things about his tuning.

maddog20

I got my car tuned there also. Great job I drive my car daily and make good power. I'll be going back to him after the build. Check sig for numbers. This on a Y8

b16hybridsol

how long didi it take you guys to get up there, i've gotta trailer my car to where ever i go an dif its to far i'm thinking about just waitin for dpr to get their dyno

phiberoptik

Youre in Findlay so... Im guessing it takes you what 45min-1 hour to trailer a car to Michigan and another hour and a half max to get to Troy...

be glad you arent coming from Cincinnati... lol

gitwidit

Nice setup
Good #'s
Payn

quikB18B

Just curious if you had a boost controller would you have looked for bigger #'s?