Eagle rods for B18c1
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jan 2009
Posts: 289
Likes: 1
From: Louisville, Ky.
Eagle rods for B18c1
NOTES:
standard rod for B18A, B18B, B20B, B20Z. Older design used 5/16" bolt (3/8" head) - torque was 28 ftlbs with moly lube.
This was in the bottom of the page in the *notes* section. This means that the rods you are looking at are for the NON-VTEC B series engines listed. They can be used in a B18c IF you're running an LS crank. GSR crank requires the proper Eagle rods for that application.
standard rod for B18A, B18B, B20B, B20Z. Older design used 5/16" bolt (3/8" head) - torque was 28 ftlbs with moly lube.
This was in the bottom of the page in the *notes* section. This means that the rods you are looking at are for the NON-VTEC B series engines listed. They can be used in a B18c IF you're running an LS crank. GSR crank requires the proper Eagle rods for that application.
Last edited by AlAddiN|502; Nov 12, 2010 at 08:28 AM.
Thread
Thread Starter
Forum
Replies
Last Post
turbohf
Classifieds: Forced Induction
1
May 20, 2006 08:49 PM