dyno of a friends car
New User
Joined: Oct 2001
Posts: 2,143
Likes: 0
From: Miami, FL
Re: dyno of a friends car (HXMan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HXMan »</TD></TR><TR><TD CLASS="quote">Whats with the torque hitting a platau...then holding, then falling and holding again?</TD></TR></TABLE>
look at the colors of torque and horsepower..
the blue ones are one run, hp and torque, the red ones are another run hp/tq..the plateau was only on pass number 11..which seams to have had a boost spike when the turbo first spooled..pass number 12, the spike was corrected and alot more hp was made, with some other tuning besides fixing the boost i'd assume..
look at the colors of torque and horsepower..
the blue ones are one run, hp and torque, the red ones are another run hp/tq..the plateau was only on pass number 11..which seams to have had a boost spike when the turbo first spooled..pass number 12, the spike was corrected and alot more hp was made, with some other tuning besides fixing the boost i'd assume..
Guest
Posts: n/a
ohh, damn...
i didn't even notice which pic i put up. ok, that second run was made on around 17psi. when vtec hit...the wastegate basically blew...let out all boost...and then started again.
haha, it was FUCKED
damned deltagates
there is a 38mm tial on the way
and the deminsions of the engine are the same a a b20:p
i didn't even notice which pic i put up. ok, that second run was made on around 17psi. when vtec hit...the wastegate basically blew...let out all boost...and then started again.
haha, it was FUCKED
damned deltagates
there is a 38mm tial on the way
and the deminsions of the engine are the same a a b20:p
New User
Joined: Mar 2001
Posts: 12,296
Likes: 0
Re: (GSRswapandslow)
Funny I heard about this about 30 minutes ago on AIM and saw the chart already! 
Hendrivk Edition snt it to me. Impressive for the baseline runs too with relatively minimal tuning on it. He posted somewhere else about this but where? I was saying something about his CR. 
Hendrivk Edition snt it to me. Impressive for the baseline runs too with relatively minimal tuning on it. He posted somewhere else about this but where? I was saying something about his CR. Guest
Posts: n/a
well, there wasn't much tuning that could be done
his msd was ******* up...so we had to mess with that.
i mean, we at least had a fun time doing it all. we're going to be doing more tuning thuresday or friday before Jason and i leave to go to maryland.
we have a thread on CH.com about it...
his msd was ******* up...so we had to mess with that.
i mean, we at least had a fun time doing it all. we're going to be doing more tuning thuresday or friday before Jason and i leave to go to maryland.
we have a thread on CH.com about it...
Thread
Thread Starter
Forum
Replies
Last Post
Black R
Forced Induction
35
May 14, 2005 07:58 AM