Duc's 712whp Dyno Plot...

Reply Subscribe

Thread Tools

Search this Thread

Oct 11, 2003 | 10:51 AM

Kataku2K3

Thread Starter

Honda-Tech Member

Joined: Dec 2001

Posts: 5,418

Likes: 5

From: Gresham, Oregon, USA

Duc's 712whp Dyno Plot...

Sorry to make another post but I just figured it would be easier than goin to the bottom of the second page on the previous post... Here's the plot, I'll get a higher resolution one scanned sometime but again, this is just quick and easy for now... Just as Scott says, the car still has to prove itself, without that the power isn't anything... Peace

Oct 11, 2003 | 10:55 AM

twkdCD595

Honda-Tech Member

Joined: Jun 2002

Posts: 5,551

Likes: 1

From: USA

Re: Duc's 712whp Dyno Plot... (Kataku2K3)

so smooth... damn I expected to be a bit spikey on the top end... good tuning I guess!

BTW that is HUGE numbers... congrats!

Oct 11, 2003 | 10:56 AM

alpha

Honda-Tech Member

Joined: Jan 2003

Posts: 7,277

Likes: 1

From: A Place in, Florida, USA

Re: Duc's 712whp Dyno Plot... (Kataku2K3)

I don't know what to say. That's fscking great. I agree though. I want to see if that power is even usable. Can't wait to see a video or a time slip!

Oct 11, 2003 | 10:59 AM

BodyKits NW

Honda-Tech Member

Joined: Jan 2000

Posts: 4,468

Likes: 0

From: Carbon Fiber Land, USA

Re: Duc's 712whp Dyno Plot... (0x64)

GZ dyno graphs are always smooth, cause they good

Oct 11, 2003 | 11:04 AM

Burke

Banned

Joined: Jun 2001

Posts: 1,992

Likes: 0

From: Youngstown, OH

Re: Duc's 712whp Dyno Plot... (BodyKits NW)

on a mustang dyno!!!!

Oct 11, 2003 | 11:05 AM

CheezeFrog

Honda-Tech Member

Joined: Nov 2000

Posts: 1,678

Likes: 1

From: Phoenix, AZ

Re: Duc's 712whp Dyno Plot... (Kataku2K3)

OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG OMFG

Oct 11, 2003 | 11:08 AM

bstlude

Joined: Jun 2003

Posts: 34

Likes: 0

what cheeze said

Trending Topics

Desperately need help identifying rear calipers

16

348
civic VX d15z1 ignition timing

22

9.0k
AMR500 SuperCharger On D15B2

4

165
OBD0 DIZZY WITH P28 ECU

7

254
Replacing Axles in a 1996 RHD Integra Type R

3

163

Oct 11, 2003 | 11:13 AM

Spooled1.6L

Honda-Tech Member

Joined: Mar 2003

Posts: 579

Likes: 0

From: Bear, DE, 19701

Re: (bstlude)

well god damn im moving to Oregron!

Oct 11, 2003 | 11:15 AM

Boostfed

New User

Joined: Mar 2001

Posts: 12,296

Likes: 0

Re: Duc's 712whp Dyno Plot... (Kataku2K3)

Now go get some 1/4 mile times!!!!! Big props!

Oct 11, 2003 | 11:18 AM

#10

InfamousRS

Member

Joined: May 2001

Posts: 3,094

Likes: 0

From: The Pacific, Northwest

Re: (Spooled1.6L)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Spooled1.6L »</TD></TR><TR><TD CLASS="quote">well god damn im moving to Oregron!</TD></TR></TABLE>

Where?

Those are some BIG *** numbers!!!!! Cant wait to see what it runs! Adam, is this Duc's daily driver?

Oct 11, 2003 | 11:20 AM

#11

Kataku2K3

Thread Starter

Honda-Tech Member

Joined: Dec 2001

Posts: 5,418

Likes: 5

From: Gresham, Oregon, USA

Re: (InfamousRS)

Yup, he drives it everywhere when he's not rolling his bikes... We had Brian's wheels (15's) on it right after it made 619whp (28lbs.) and turned down the boost to run straight off the 1.3 Bar wastegate sping, it broke loose fifth... It'll probably still be a pain in the *** (traction wise) but atleast we don't need to run such a stiff spring... Peace

Modified by Kataku2K3 at 12:34 PM 10/11/2003

Oct 11, 2003 | 11:25 AM

#12

twkdCD595

Honda-Tech Member

Joined: Jun 2002

Posts: 5,551

Likes: 1

From: USA

Re: (Kataku2K3)

dear lord he daily drives it, guess at least with a turbo that big you dont have to try too hard to keep it out of boost for decent gas mileage.

Oct 11, 2003 | 11:32 AM

#13

Zero2Sixty

Honda-Tech Member

Joined: Jun 2002

Posts: 439

Likes: 0

From: oklahoma city, ok, USA

Re: (twkdCD595)

badass, any videos?

Oct 11, 2003 | 11:36 AM

#14

Kataku2K3

Thread Starter

Honda-Tech Member

Joined: Dec 2001

Posts: 5,418

Likes: 5

From: Gresham, Oregon, USA

Re: (Zero2Sixty)

Not yet, we gotta get a lot more footage before I start... Oh well, if we ever just go "mess around" then I'll tape...

Oct 11, 2003 | 11:41 AM

#15

hpfsi

Honda-Tech Member

Joined: Jan 2003

Posts: 452

Likes: 1

From: PACNW

Re: Duc's 712whp Dyno Plot... (Kataku2K3)

GZM... single handed-ly making my place of residence home to some of the highest hp daily driven cars around

712whp on a Mustang dyno from a daily driven ff car... that is ludicrous speed

Oct 11, 2003 | 11:46 AM

#16

sharkcohen

Joined: Jul 2002

Posts: 2,374

Likes: 1

From: East Bay, CA, USA

Re: Duc's 712whp Dyno Plot... (Kataku2K3)

Impressive and insane.

Oct 11, 2003 | 11:58 AM

#17

GSRswapandslow

Guest

Posts: n/a

*wipes up mess*

yeah, i'll run him. he has to roll on 175/70/13's though

Oct 11, 2003 | 12:13 PM

#18

turbo_ef9

Joined: Feb 2002

Posts: 4,595

Likes: 0

From: SingLe caM tuRbo, WA, usa

Re: (GSRswapandslow)

good numbers.. i shoulda got my **** tuned from you guys when i had the chance too.....

Oct 11, 2003 | 12:22 PM

#19

done

Honda-Tech Member

Joined: Aug 2001

Posts: 6,470

Likes: 0

From: www.js-garage.com

Re: Duc's 712whp Dyno Plot... (Kataku2K3)

What turbo setup is he running, and what is the displacement on the motor.. That car is very impressive..

Oct 11, 2003 | 12:23 PM

#20

Boostfed

New User

Joined: Mar 2001

Posts: 12,296

Likes: 0

Re: Duc's 712whp Dyno Plot... (Jordo)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jordo »</TD></TR><TR><TD CLASS="quote">What turbo setup is he running, and what is the displacement on the motor.. That car is very impressive..</TD></TR></TABLE>
I believe they said PT74 and stock bore?

Oct 11, 2003 | 12:24 PM

#21

Kataku2K3

Thread Starter

Honda-Tech Member

Joined: Dec 2001

Posts: 5,418

Likes: 5

From: Gresham, Oregon, USA

Re: Duc's 712whp Dyno Plot... (Jordo)

Hey guys, Mike (jdmDXrex) and I are gonna take a drive up from school (Corvallis, OR) to Portland so we can tape some dyno pulls... We should be back tonite but if not then i'll have the vids up ASAP... Peace

Oct 11, 2003 | 12:25 PM

#22

done

Honda-Tech Member

Joined: Aug 2001

Posts: 6,470

Likes: 0

From: www.js-garage.com

Re: Duc's 712whp Dyno Plot... (Boostfed)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed »</TD></TR><TR><TD CLASS="quote">
I believe they said PT74 and stock bore?</TD></TR></TABLE>

thats awesome

Oct 11, 2003 | 12:30 PM

#23

twkdCD595

Honda-Tech Member

Joined: Jun 2002

Posts: 5,551

Likes: 1

From: USA

Re: Duc's 712whp Dyno Plot... (Kataku2K3)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kataku2K3 »</TD></TR><TR><TD CLASS="quote">Hey guys, Mike (jdmDXrex) and I are gonna take a drive up from school (Corvallis, OR) to Portland so we can tape some dyno pulls... We should be back tonite but if not then i'll have the vids up ASAP... Peace</TD></TR></TABLE>