I'm sure it's somewhere on this board, but the seach function sucks. I just wanna know the dimensions of a drag 3 intercooler core. Thanks.

 

The dimensions for the core are 27 x 7 x 2.5in

Adi

 

did you measure it yourself? i think 27" is a bit wide from the picutres i've seen. i looked around ebay and some guy who's selling one says it's 22x6.5x2.5 http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1823429149&r=0&t=0&sho wTutorial=0&ed=1020038355&indexURL=0&rd=1 . any ideas? (maybe the guy who's selling it just doesnt know how to measure correctly hehe)

 

Well I know that with end tanks and not measuring the pipe ends that it is 27 inches long he might not be measuring the end tanks...

Plus I would say that the price is to high on that perticular auction because the core is used... I would check out this following link for a very good core that is reasonably priced http://www.roadraceengineering.com/intercoolers.htm....scroll down to about the middle where they have the $300 griffin cores that are brand new the size on those are 20" x 10"..

Later,

Adi