Trying to work out a trade with my turbo kit for a guys brand new darton block.
My question starts with the open deck sleeves...
Are they strong enough for 25psi no problem or should i be looking for some closed deck sleeves.


Modified by 92VXeg at 11:32 AM 9/4/2008


Modified by 92VXeg at 11:32 AM 9/4/2008

 

is this a DART or DARTON block cause a dart block is closed deck design

 

oooo **** didnt realize..Its a Darton.

 

darton open deck should be fine..

 

Which would be smarter....darton open deck or GE closed deck sleeves
Im probably going to go with the GE since i would like it to be the last block i buy, i wont feel the need to upgrade. Im shooting for around 450hp and i dont know what bore im aiming at right now which is really why i want the GE. I honestly didnt even notice that the block was open deck until above post asked if it was Dart or Darton. I looked right past it. thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92VXeg &raquo;</TD></TR><TR><TD CLASS="quote">Which would be smarter....darton open deck or GE closed deck sleeves
Im probably going to go with the GE since i would like it to be the last block i buy, i wont feel the need to upgrade. Im shooting for around 450hp and i dont know what bore im aiming at right now which is really why i want the GE. I honestly didnt even notice that the block was open deck until above post asked if it was Dart or Darton. I looked right past it. thanks</TD></TR></TABLE>


450hp? people make this on stock sleeves. you're fine with either.

 

ok cool thanks