Damn Inline Fuel Pump Issues/Problems, PLEASE read...
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2003
Location: Louisville, KY, USA
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Damn Inline Fuel Pump Issues/Problems, PLEASE read...
Installed a Walbro Inline Fuel Pump today on my boosted 92 Integra LS.
Pump is flowing the right way, inbetween the Fuel Filter and Fuel Rail.
My issue is once the car is on and the inline is on and going, the fuel press gauge stops reading fuel pressure. The gauge is mounted on the Fuel Filter where AUTOMETER tells me to.
The Inline is grounded to the Thermo. housing and the power wire is ran under the back seat of the car to the 12v power wire that leads to the fuel pump.
When i drive the car is idles differently, and the car cuts in and out when i drive it with some decent acceleration into boost.
Thanks,
Wade
Pump is flowing the right way, inbetween the Fuel Filter and Fuel Rail.
My issue is once the car is on and the inline is on and going, the fuel press gauge stops reading fuel pressure. The gauge is mounted on the Fuel Filter where AUTOMETER tells me to.
The Inline is grounded to the Thermo. housing and the power wire is ran under the back seat of the car to the 12v power wire that leads to the fuel pump.
When i drive the car is idles differently, and the car cuts in and out when i drive it with some decent acceleration into boost.
Thanks,
Wade
Thread
Thread Starter
Forum
Replies
Last Post
prestonpark
Tech / Misc
15
03-15-2006 09:45 PM