Custom Web Turbo cams??
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2002
Location: NYC Queens but now Palm Bay, Florida
Posts: 485
Likes: 0
Received 1 Like
on
1 Post
Custom Web Turbo cams??
what do you think of the specs of these b16 cams
Intake Exhaust
Valve lash .010 .010
Valve lift .475 .435
duration 265 degrees 270 degrees
duration @ .050 240 degrees 245 degrees
Lobe center 110 degrees 110 degrees
How much horsepower would these cams be good for ?
what kind of setup would they be good for ?
A friend ordered them for a customer and the customer never picked them and I got them for free
The motor is a b16 pin block je pistons & eagle rods , the head has a complete skunk valve train . Compression is 8.5:1 running a t3t04e turbonetics turbo
Modified by BoostedEF at 9:01 AM 1/26/2006
Intake Exhaust
Valve lash .010 .010
Valve lift .475 .435
duration 265 degrees 270 degrees
duration @ .050 240 degrees 245 degrees
Lobe center 110 degrees 110 degrees
How much horsepower would these cams be good for ?
what kind of setup would they be good for ?
A friend ordered them for a customer and the customer never picked them and I got them for free
The motor is a b16 pin block je pistons & eagle rods , the head has a complete skunk valve train . Compression is 8.5:1 running a t3t04e turbonetics turbo
Modified by BoostedEF at 9:01 AM 1/26/2006
Thread
Thread Starter
Forum
Replies
Last Post
jceltalentoso
All Motor / Naturally Aspirated
5
06-19-2012 10:31 PM
kielcivic
Forced Induction
29
04-09-2012 09:35 PM