CoreyR (CCFab) Manifold review.....tons of pictures (56k f**k off)
#1
Man U FTW
Thread Starter
CoreyR (CCFab) Manifold review.....tons of pictures (56k f**k off)
I recently purchased this manifold from CoreyR and it finally arrived. I say finally lightly because shipping was very puntual. It was packed very nicely and even insured for its full value. I have been getting a lot of questions lately about what i think of this manifold. I'm going to let the pictures speak for themselves, but to say that i'm satisfied is an understatement
PICTURES:
VERDICT: Don't listen to everything you may hear....if you want one, STFU and buy one
PICTURES:
VERDICT: Don't listen to everything you may hear....if you want one, STFU and buy one
Trending Topics
#8
Man U FTW
Thread Starter
i'm going to have to find out....i only have a .6bar WG spring so it can creep (hopefully it wont)
oh and BTW....thanks to Straight Line Specialties for the new Tial 38mm that i picked up from them today....
oh and BTW....thanks to Straight Line Specialties for the new Tial 38mm that i picked up from them today....
#13
Honda-Tech Member
Re: (Schister66)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Schister66 »</TD></TR><TR><TD CLASS="quote">IMO the welds are great....penetration is good too</TD></TR></TABLE>
How so ? What makes them great ?
How so ? What makes them great ?
#15
Honda-Tech Member
Join Date: Dec 2001
Location: edmo, AB, Canada
Posts: 2,003
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Schister66)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tony1 »</TD></TR><TR><TD CLASS="quote">What turbo are you running? A decent sized turbo with a 38mm gate coming off at that angle is going to creep like a bitch...</TD></TR></TABLE>
i agree, i have a topmount that i built, and the wastegate(tial 38mm) comes off at aprox 90 to the collector, with the .6bar spring it creeps to about 12-14lbs. i'm running a holset hx35 which is somewhat close to the 60-1. just something to keep an eye out for
i agree, i have a topmount that i built, and the wastegate(tial 38mm) comes off at aprox 90 to the collector, with the .6bar spring it creeps to about 12-14lbs. i'm running a holset hx35 which is somewhat close to the 60-1. just something to keep an eye out for
#17
Re: CoreyR (Schister66)
i have no experience with welding at all,, but what's this hole from? is the normal? wont it leak or start cracking from it?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cua0 »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cua0 »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
#18
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2006
Location: F0ck ur Offer, USA
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
Re: CoreyR (bag)
beat me to it. any explanation as to what that is? come on schister let me know as I am still thinking of either this or the revhard style logs egay pumps out.
this is the reason I was worried about the welds on these manifolds as opposed to cast iron ones... well let us know!
this is the reason I was worried about the welds on these manifolds as opposed to cast iron ones... well let us know!
#19
Re: CoreyR (j3t1p)
^ that above pic oh the weld doesnt look too good.....that little section right there has barely any filler. looks like it'll start to crack where the hole is, regardless if its welded from the inside or not.
Thread
Thread Starter
Forum
Replies
Last Post