is cop worth it for my setup
05-26-2006, 07:24 PM
#1
Thread Starter
Join Date: Oct 2004
Location: upstate, ny
Posts: 2,278
Likes: 0
Received 0 Likes
on
0 Posts
is cop coil on plug worth it for my setup
would i benefit from coil on plug with my setup. im looking for a very reliable setup. i dont look forward to changing out rotors, and dizzies
fully built b18c, benson sleeves cp pistons pauter rods, built head, p and p, ferrea valves, crower springs/ret. quaife lsd, exedy twin disk,
gt35r 32+psi weekend warrior, and probly 18-20 on the street.
625-650 on race gas
450 on pump gas
i would need t1 sensor kit 550, aem c2di 289, and honda cbr 929 coil sticks with harness 100. since i need to buy new honda dizzy and wires, its gonna cost me an extra 700 over oem. im also already running aem ems.
how often would i run into rotor changes, and caps.
fully built b18c, benson sleeves cp pistons pauter rods, built head, p and p, ferrea valves, crower springs/ret. quaife lsd, exedy twin disk,
gt35r 32+psi weekend warrior, and probly 18-20 on the street.
625-650 on race gas
450 on pump gas
i would need t1 sensor kit 550, aem c2di 289, and honda cbr 929 coil sticks with harness 100. since i need to buy new honda dizzy and wires, its gonna cost me an extra 700 over oem. im also already running aem ems.
how often would i run into rotor changes, and caps.
Thread
Thread Starter
Forum
Replies
Last Post
surfinjoe911
All Motor / Naturally Aspirated
17
12-09-2007 01:29 PM
