Compressor map for master power turbo???
#1
Junior Member
Thread Starter
Join Date: Jul 2006
Location: Nowhere, USA
Posts: 810
Likes: 0
Received 0 Likes
on
0 Posts
Compressor map for master power turbo???
Does anyone know where i can get a compressor map for a master power turbo?
specs:
Model:810019
57trim compressor .50a/r turbine.48a/r stage 3 wheel.
I would like to know a few things about this turbo...
is it capable of 300hp with out redic high IAT's on an LS motor?
When will full boost be achieved?
Will boost carry all the way to red line?
My specs for my setup so far are as follows
Stock b18b1 (redline 7000rpm)
Drag Log Manifold
Drag 2.5in DP...(open downpipe)
2.5in Piping all they way around.
Jonnhy Race Car 6in FMIC
DSM 450cc tuned on crome
Im looking for a fast street car that is capable of 300whp and full boost by 4k-7k with out fall off.
I am planning on using a masterpower turbo b/c i do not want to pay 600 for a garret, if i can do the same thing with 400 for a masterpower turbo.
Judging from what i read, i should be able to get to 300whp at around or maybe 15-18psi. But im not sure, can someone please help me verify this as well.
link to the turbo.. http://partsexpressonline.com/...88981
Thanks
specs:
Model:810019
57trim compressor .50a/r turbine.48a/r stage 3 wheel.
I would like to know a few things about this turbo...
is it capable of 300hp with out redic high IAT's on an LS motor?
When will full boost be achieved?
Will boost carry all the way to red line?
My specs for my setup so far are as follows
Stock b18b1 (redline 7000rpm)
Drag Log Manifold
Drag 2.5in DP...(open downpipe)
2.5in Piping all they way around.
Jonnhy Race Car 6in FMIC
DSM 450cc tuned on crome
Im looking for a fast street car that is capable of 300whp and full boost by 4k-7k with out fall off.
I am planning on using a masterpower turbo b/c i do not want to pay 600 for a garret, if i can do the same thing with 400 for a masterpower turbo.
Judging from what i read, i should be able to get to 300whp at around or maybe 15-18psi. But im not sure, can someone please help me verify this as well.
link to the turbo.. http://partsexpressonline.com/...88981
Thanks
#2
Honda-Tech Member
Re: Compressor map for master power turbo??? (Whiteintegra)
hit up spoolindc2 i got my master power from him. hes prolly got some info. i think his link may be in my sig.
edit: its the spoolin link in my sig.
edit: its the spoolin link in my sig.
Thread
Thread Starter
Forum
Replies
Last Post
Full-Race Geoff
Forced Induction
5
06-25-2002 07:12 PM