Compression Test numbers: Need Opinions
#1
New User
Thread Starter
Join Date: Sep 2001
Location: Austin, TX
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
Compression Test numbers: Need Opinions
Stock B18C1, all plugs removed, EFI disabled, WOT:
1: 190
2: 180
3: 195
4: 190
With 1 cap of oil in cylinder:
1: 230
2: 210
3: 240
4: 230
Bad rings and valves on cylinder 2?
1: 190
2: 180
3: 195
4: 190
With 1 cap of oil in cylinder:
1: 230
2: 210
3: 240
4: 230
Bad rings and valves on cylinder 2?
#3
Join Date: Oct 2002
Location: Saint Petersburg,, FL, USA
Posts: 1,642
Likes: 0
Received 0 Likes
on
0 Posts
Re: Compression Test numbers: Need Opinions (echo999)
Not sure what would make it go up, but in general people seem to stop at 5 cranks. Were your #'s at lot lower around 5 cranks?
Trending Topics
#8
Honda-Tech Member
Join Date: Feb 2002
Location: SC61ville, Brooklyn, NY/TX, USA
Posts: 10,836
Likes: 0
Received 0 Likes
on
0 Posts
Re: Compression Test numbers: Need Opinions (echo999)
im not expert but they look nice an uniform, a tiny low for ur car (usually 200+ to 210). When I did mine on my civic si it was 190 180 190 205. It didn't do the oil drop cause these numbers seemed fine to me.
#9
Re: Compression Test numbers: Need Opinions (FredoSP)
Those # are not that bad dude. Service limit is 175psi, so you are still ok. I drove around on 90psi on 1 cylinder for months.
art
art
#12
Re: Compression Test numbers: Need Opinions (Arturbo)
That's not too shabby. I remember when the ringlands on my #3 cylinder decided to take a ****...
220, 220, 125, 220
That was a good time. It gets old adding a quart of oil every 3 days.
220, 220, 125, 220
That was a good time. It gets old adding a quart of oil every 3 days.
Thread
Thread Starter
Forum
Replies
Last Post
gooblinn258
Acura Integra
20
05-30-2014 12:20 PM
Fat Chick Magnet
Acura Integra
5
11-22-2006 09:52 PM
model x
Tech / Misc
5
10-26-2005 02:01 AM