igo4bmx

I need a cn2 connector to datalog via a hondata setup

someone mentioned digikey, but an exact link would be great!

DaX

iTrader: (1)

Your hondata dealer should have them.

Not sure, but you could also check moates.net

wantboost

iTrader: (2)

ebay, they have the cables for like 4 bucks plus shiping

093turbo16

iTrader: (2)

digi key my friend.

http://www.digikey.com

Part# 640456-4

igo4bmx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wantboost &raquo;</TD></TR><TR><TD CLASS="quote">ebay, they have the cables for like 4 bucks plus shiping</TD></TR></TABLE>

not the cable, but the pin set that mounts on the ecu

igo4bmx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93turbo16 &raquo;</TD></TR><TR><TD CLASS="quote">digi key my friend.</TD></TR></TABLE>

link to digikey product?

i don't even know what it looks like

would it be this ? (from a search)
http://rocky.digikey.com/scrip...454-4

093turbo16

iTrader: (2)

I did link you, just copy and paste the part number into the search line.

igo4bmx

oh thanks man

093turbo16

iTrader: (2)

no prob.

igo4bmx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93turbo16 &raquo;</TD></TR><TR><TD CLASS="quote">no prob.</TD></TR></TABLE>

what about a cable for it?
any suggestions?

0project dc2

iTrader: (1)

happen tgo know what the female portion part number is ?

0xenocron

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by project dc2 &raquo;</TD></TR><TR><TD CLASS="quote">happen tgo know what the female portion part number is ? </TD></TR></TABLE>

A19114-ND

But you need a special tool to press in the wires. I have quite a few if you need one and I am sure there are other compatible female connectors.