sir3n

i need to replace my clutch not only because it's starting to go but also it isn't going to be able to handle my new setup. right now i have a 96 prelude vtec with a t3/t4 turbo kit on it. i recently blew a ring land which means i need new pistons. i am going to resleeve, get je 9:1 pistons, and eagle rods. pretty soon i am going to get hondata and have it tuned. i'm planing on running about 10psi daily and maybe kick it up to 12 or 15 every once in a while. what brand of clutch should i get and what type? part number? thank you guys

TurboTegB18c

I would recommend the action stage 2ms. That's what i'm running and and it's holding 400whp. PM me for pricing if your interested. Paul

Tofurky

Clutch Masters Stage 4

JO

I'm kinda in the same boat. I have an HD/SS and it slips after 5 passes at the track. I'm putting down 220whp but my set-up is good for ~350whp once I get it tuned.

I want a clutch that will hold multiple passes at the track, still be streetable and last more than one season.

How about Competition Clutch with a 6-puck disk?

hybridb18

clutchmasters stage 3 or 4, or even an act street disc with an extreme pressure plate

green_GSR

Triple plates

JO

Thanks, sounds like a good idea, could I keep the street disc I already have in there and just get the Xtreme pressure plate? It would be nice, I could save a few hundred bucks..

quikB18B

Act xt/ss

u2civic1

6 puck