close loop - bay area people help
08-08-2002, 08:19 AM
#1
Junior Member
Thread Starter
close loop - bay area people help
Alright, I'm getting tired of the Tial noise so it's time to shut it up ... plus I don't want to inhale exhaust fumes everytime I drive 
I have a Maxrev manifold and the dumptube I got from Ben won't fit on the Tial. I need something fabricated like what Dustin has on his close loop system http://imglib.************/index.cgi?...wimage&id=3616.
I don't want to goto any Joe Schmoe muffler shop and have it done so can anybody recommend me a shop or even an individual who can fabricate a new dump tube and route it back to my downpipe?
I have a Maxrev manifold and the dumptube I got from Ben won't fit on the Tial. I need something fabricated like what Dustin has on his close loop system http://imglib.************/index.cgi?...wimage&id=3616.
I don't want to goto any Joe Schmoe muffler shop and have it done so can anybody recommend me a shop or even an individual who can fabricate a new dump tube and route it back to my downpipe?
08-08-2002, 08:36 AM
#2
Junior Member
Join Date: Feb 2002
Location: ca, usa
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: close loop - bay area people help (Trigun)
if you don't mind paying go to Sanderson Headers in south san francisco,they have all the possible parts you could need mandrels ,flanges,ect .they have been big help with my project. good luck
08-08-2002, 09:23 AM
#3
Junior Member
Thread Starter
Re: close loop - bay area people help (sloef)
cool thx for the reply ... i'll have to check them out but i would like to get more options 
anybody else in the bay run a closed loop system?
anybody else in the bay run a closed loop system?
Thread
Thread Starter
Forum
Replies
Last Post
egtwincam
Welding / Fabrication
13
08-26-2005 06:29 PM
project dc2
Forced Induction
5
12-25-2004 05:34 PM
TAG
Forced Induction
3
07-18-2003 07:00 PM