mahcivic

well me and josh (cc-fab) have a friend with a h22 in a accord who wanted to go turbo. thought i share the progress from last weekend. kit consist of. cc-fab, mani, downpipe, charge piping and rerouted dump, sc61, 550cc injectors, jrc 8" fmic, tial 38mm wastegate, act clutch, and the other nessacary goodies. he dynoed 190 whp NA and previously was spraying a 75 shot. the turbo is going to be replacing the spray. onto the pics











we still have to do the wastegate dump and add a flex in the downpipe along with the hotside charge piping, just waiting on the rest of the materials, hope to have it down this weekend. the reason the downpipe has such a hard angle is because of the front motormount, we had to shave a little off it to get enough clearance for any kinda of downpipe.

quicksilvia

wow that looks great. that car should MOVE good

eg360B

Nice Manifold. So your company is out of Fairfield? thats wuts up.. for a Nice Kit, keep us updated on the H

mahcivic

manifold and downpipe are acutally for sale, kid turned out to not have enough money to pay for the parts. look for a forsale post in the next few days

ccfab

no no , cc-fab is me, jordan is looking to get in with me. im in bristol, lets not get confused i run the operation.

2point2

#3 = 4 x #2

rhdune16

you guys thinking about selling the IC and charge piping??... I'd be interested.... PM me a price...

roll5104life

my manifolds about to be made any pics of turbo to alternator clearance?

rhdune16

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rhdune16 &raquo;</TD></TR><TR><TD CLASS="quote">you guys thinking about selling the IC and charge piping??... I'd be interested.... PM me a price...</TD></TR></TABLE>

ANY REPLY TO THIS QUESTION???... I am still interested...

.RTErnie

work on not undercutting your welds. Either that or make another pass and fill them in.

ccfab

if we had a descne t demand im sure we could fire out a few sets.

kamAccord

I'm very interested and ready to puchase if hte mani and downpipe allow for a/c and power steering compatibility in the accord. How much for manifold, 3"downpipe, dumptube, and intercooler piping w/flange for HKS Super Sequential Blowoff valve?

mahcivic

i sent you a pm, that manifold was a one time deal for that customer, who ended getting us the cash in the end for it, check your pm

G"UNIT

The Manifold has a little turbo on it.That looks hot..lol.. Nice

Soccerking3000

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2point2 &raquo;</TD></TR><TR><TD CLASS="quote">#3 = 4 x #2</TD></TR></TABLE>

so? plenty of manifolds arent equal length and work great. anyways project looked good, i dont see how people can start a project and then all of a sudden run out of money

HamiltonRex

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2point2 &raquo;</TD></TR><TR><TD CLASS="quote">#3 = 4 x #2</TD></TR></TABLE>

amen to that..

It seems all your manifolds i see have atleast 1 horribly misaligned joint somewhere.. even your personal one..

Im not bashing you, but you get what you pay for.

boosted94cx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HamiltonRex &raquo;</TD></TR><TR><TD CLASS="quote">amen to that..

It seems all your manifolds i see have atleast 1 horribly misaligned joint somewhere.. even your personal one..

Im not bashing you, but you get what you pay for.</TD></TR></TABLE>

where are the manifolds you make?

D-t

Lookin good

HamiltonRex

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by s13-t &raquo;</TD></TR><TR><TD CLASS="quote">where are the manifolds you make?</TD></TR></TABLE>

I do my own work on my car.. no time to sell, i like his welds.. but it looks like he could put a bit more time into the fitment of his pieces.

boosted94cx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HamiltonRex &raquo;</TD></TR><TR><TD CLASS="quote">I do my own work on my car.. no time to sell, i like his welds.. but it looks like he could put a bit more time into the fitment of his pieces.</TD></TR></TABLE>

i've seen you whine about his stuff before, why is that?

mahcivic

do you know how long ive have been doing this for, not even a year, i consider what i do pretty good for the time i have been doing it. i get what i pay for, i paid 60 dollars for my personal manifold and joshs was about the same, find me something else that looks like and has the price tag of our stuff, sorry we dont have robots welding and cutting our **** like fullrace, we havent been doing this for as long as they have, we are just trying to help out kids who are on a budget, and what to get boosted, have something that they like, looks cool and is orginal.

Soccerking3000

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mahcivic &raquo;</TD></TR><TR><TD CLASS="quote">do you know how long ive have been doing this for, not even a year, i consider what i do pretty good for the time i have been doing it. i get what i pay for, i paid 60 dollars for my personal manifold and joshs was about the same, find me something else that looks like and has the price tag of our stuff, sorry we dont have robots welding and cutting our **** like fullrace, we havent been doing this for as long as they have, we are just trying to help out kids who are on a budget, and what to get boosted, have something that they like, looks cool and is orginal. </TD></TR></TABLE>

bingo

THC07

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Soccerking3000 &raquo;</TD></TR><TR><TD CLASS="quote">

bingo </TD></TR></TABLE>
you said it, i wanna see some updates

Schister66

this was like 8 months ago....