Cam guru's come here
Thread Starter
Honda-Tech Member
Joined: Jan 2005
Posts: 1,234
Likes: 0
From: Warner Robins, GA
Cam guru's come here
I have a set of Rocket Motorsports Gen2 springs and Ti-retainers. Gen2 springs have 55 lbs. on the seat and 180 lbs. at 12mm of lift. These springs can handle up to 14mm of lift when used with the Gen2 retainers.
Im just trying to figure out what is a good cam to run with these springs/retainers.
Heres my set-up:
Lsvtec - b18b block, eagle rods, mahle 10.5:1 gsr pistons; b16 head all stock w/ AEM cam gears; CC Fab top mount, ebay 51 trim, 3" down pipe, 3" thermal catback, 14.5 psi making 344/252 at 8k
Im just trying to figure out what is a good cam to run with these springs/retainers.
Heres my set-up:
Lsvtec - b18b block, eagle rods, mahle 10.5:1 gsr pistons; b16 head all stock w/ AEM cam gears; CC Fab top mount, ebay 51 trim, 3" down pipe, 3" thermal catback, 14.5 psi making 344/252 at 8k
Thread
Thread Starter
Forum
Replies
Last Post
photonjedi808
Honda CRX / EF Civic (1988 - 1991)
6
Apr 17, 2003 01:08 PM
