burnt piston!
Thread Starter
Joined: Apr 2008
Posts: 6
Likes: 0
From: manila, mnl, philippines
burnt piston!
what causes pistons to be burnt on the only on the intake side of the pistons? a little on to top, most on the top of the first compression ring. could it be timing? fuel? or ring did not seal properly?
Thread Starter
Joined: Apr 2008
Posts: 6
Likes: 0
From: manila, mnl, philippines
Re: burnt piston! (blwn95civic)
sorry its a non honda engine. its a toyota 4agze. made 291whp 240lb tq. emanage ultimate for tuning. fuel set up. walbro with 750cc. timing i thinks is at 20deg at full boost 18psi. ill take a picture later.
Thread Starter
Joined: Apr 2008
Posts: 6
Likes: 0
From: manila, mnl, philippines
Re: burnt piston! (street_ride14)
sorry. its a crappy vga camera phone. the piston is forged ceramic coated. the white parts on top and side of the piston is burnt. scorched and pitted.
Thread
Thread Starter
Forum
Replies
Last Post
Lindomar85
Forced Induction
9
Sep 7, 2013 05:09 AM
{StatuS ChecK}
Forced Induction
8
Aug 27, 2004 02:43 PM
