Building LS Boost - Project underway
04-04-2003, 05:23 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2002
Location: Scottsdale, AZ
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Building LS Boost - Project underway
Here is the B18b. Completley stock.
So far the parts that have came in.
Polyurthane Motor Mount Inserts
2md Action Clutch
Crower Valve springs
Race Engineering Block Guard
Rolle-Wave ENDYN's
ARP Head studs
Eagle Rods (not pictured)
ACL Bearings (not pictured)
On monday the head and block will be taken to the machine shop for installation, and cleaning. Then the swap! And almost time to start piecing together turbo (June for sure will be complete!!)
This is all going in my 98 civic ex coupe (which now has 99-00 tail lights, and a 99 si front end with Carbon Fiber Hood going on next week)
So far the parts that have came in.
Polyurthane Motor Mount Inserts
2md Action Clutch
Crower Valve springs
Race Engineering Block Guard
Rolle-Wave ENDYN's
ARP Head studs
Eagle Rods (not pictured)
ACL Bearings (not pictured)
On monday the head and block will be taken to the machine shop for installation, and cleaning. Then the swap! And almost time to start piecing together turbo (June for sure will be complete!!)
This is all going in my 98 civic ex coupe (which now has 99-00 tail lights, and a 99 si front end with Carbon Fiber Hood going on next week)
Thread
Thread Starter
Forum
Replies
Last Post
Flexin5
Acura Integra
15
09-20-2006 03:50 PM
