buid-up and tunnig question
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 159
Likes: 0
From: bowie, MD, usa
buid-up and tunnig question
Well basically my question is what kind of power should i be putting out with this setup?
b18b head w/ dual springs and retainers
b18b block w/ darton closed deck sleeves bored to 84mm
wiseco pistons 8.8:1
eagle rods
stock crank
t3/t4 turbo .57trim .63a/r
inlinepro manifolds both intake and turbo
440cc injectors
fmu
afc
tial wastegate
greddy type s bov
greddy t.v.v.c. boost controller
full 3" exhaust down pipe back
b18b head w/ dual springs and retainers
b18b block w/ darton closed deck sleeves bored to 84mm
wiseco pistons 8.8:1
eagle rods
stock crank
t3/t4 turbo .57trim .63a/r
inlinepro manifolds both intake and turbo
440cc injectors
fmu
afc
tial wastegate
greddy type s bov
greddy t.v.v.c. boost controller
full 3" exhaust down pipe back
Thread
Thread Starter
Forum
Replies
Last Post