Boosting d16z6
08-13-2005, 10:08 PM
#1
Thread Starter
Join Date: Aug 2005
Location: Richland, WA, 99352
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Boosting d16z6
What does everybody think about boosting a stock d16z6 between 6-10psi daily driven. I plan on using a quick spooling turbo like .42a/r .48a/r t3 50 trim or a dsm 16g. What do you guys think of using this set up on my stock motor for a couple of years. The motor runs excellent good compression and all regular maintence done. Let me know what ya think.
08-13-2005, 10:12 PM
#2
Thread Starter
Join Date: Aug 2005
Location: Richland, WA, 99352
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Also one other thing is it possible to use and external wastegate such as tial on either of these turbos. I havent worked on cars to much before i got my honda so everything u guys give me is a huge help. thanx
08-13-2005, 11:02 PM
#3
Honda-Tech Member
Join Date: Nov 2004
Location: Spinning, FL, USA
Posts: 2,460
Likes: 0
Received 0 Likes
on
0 Posts
08-17-2005, 03:25 PM
#4
Thread Starter
Join Date: Aug 2005
Location: Richland, WA, 99352
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
help on reading compressor maps
Ok guys I have done tons of research on how to read compressor maps. I know what everything is and means but I still can't figure out what is best for me. I plan on running 8psi on stock but fully tuned d16z6. I know the pressure ratio is 1.54 and was on a website to calculate the cfm of my motor which would be between 16-59lb/min. I just don't get how to read what turbo would have the best efficiency for me.
Thread
Thread Starter
Forum
Replies
Last Post
