Thread Starter
do you think this is ganna be rialable?i'm building a 8psi b20b on stock internes. here my setup:
- t25 ( from a talon)
- custom intercooler
- custom exhaust manifol and 3" donwpipe
- reprogramed ECU (program for a b18b with a t3/t4 with 450cc injectors an 8.5:1)
- 440cc injectors
- SMC plus
- master boost timer
if you think this is ganna blow please help me make this block stronger.
- t25 ( from a talon)
- custom intercooler
- custom exhaust manifol and 3" donwpipe
- reprogramed ECU (program for a b18b with a t3/t4 with 450cc injectors an 8.5:1)
- 440cc injectors
- SMC plus
- master boost timer
if you think this is ganna blow please help me make this block stronger.
New User
if you keep it at a moderate psi level, you wont need to build your motor to boost it.
Thread Starter
the reason i asked is that i've been hearing alot on the fact that the b20b only as 7mm of sleeve (i knew that part) (compared to a b18b that as 9mm) an that makes it unrialable. but i thought that at 8 psi there would be no problem.