Hi All,

Well my poor B16 powered Del so has been sitting on ramps for about 4 weeks while I was building my System. But yesterday... it all came together.



It's the factory B16A3
stock internals
T3 super 60 w/a .48 A/R exauhst
Modifyed Intercooler from a small turbo diesel truck
2.25" charge pipes
Work Tss BOV (eBay special)
Log manifold
Coustom 2.75" DP (but still has the stock exauhst to choke it)
DSM 450cc injectors w/a honda resistor box
Crome tuned chip for ignition and fuel (not fully tuned yet)

I still have the boost turnd down low (5psi) but it pulls hard. My final goal is to get it up between 10 and 11 psi. I need to get it onto a dyno to tune it better befor that happens. I will also need to put on a bigger exauhst before I do any real tuning.

Looks like the pic didn't work... so here's the link

http://www.turbod16.com/album_page.php?pic_id=665


Modified by Dr Honda at 5:05 PM 12/22/2003


Modified by Dr Honda at 5:07 PM 12/22/2003

 

COOL Project, good luck with it!!!

 

Link doesn't work

 

does now

 

Looks like a clean set-up, good job and good luck

 

looks good!