before d16 turbo...
Thread Starter
Honda-Tech Member
Joined: Aug 2005
Posts: 407
Likes: 0
From: Northwest, United States
before d16 turbo...
before i turbo my d16 i wanna know what all i should do to build the block and head. i'm not trying to spend thousands on prepping it, but i wanna build it to hold decent boost. any suggestions on what i should doing? i kno ARP headstuds.. some ls rods or better... replace head gasket. but what else?
Joined: Mar 2006
Posts: 107
Likes: 0
From: Califuckingfornia
Re: before d16 turbo... (EGhatch33)
under 210 WHP:
ARP headstuds
new factory headgasket (unless your current one is in good shape)
over that and you are on borrowed time on stock internals.
TUNING TUNING TUNING!!!!
the cheapest management you wanna use is a chipped ECU and larger injectors, don't expletive around with FMU's, blue boxes or Emanages
ARP headstuds
new factory headgasket (unless your current one is in good shape)
over that and you are on borrowed time on stock internals.
TUNING TUNING TUNING!!!!
the cheapest management you wanna use is a chipped ECU and larger injectors, don't expletive around with FMU's, blue boxes or Emanages
Thread Starter
Honda-Tech Member
Joined: Aug 2005
Posts: 407
Likes: 0
From: Northwest, United States
Re: before d16 turbo... (..Lloyd Braun..)
so under 210 whp i shouldnt change rods? oh and as far as tuning i have a hondata s200... its not setup for turbo tuning but i can send it in to get updated for that right?
Thread
Thread Starter
Forum
Replies
Last Post