Bay Area Dyno Results!!! Let's hear/see 'em.
#1
BMW Güdentyte
Thread Starter
Join Date: Feb 2001
Location: 110 degrees heat wave, US
Posts: 1,722
Likes: 0
Received 0 Likes
on
0 Posts
Bay Area Dyno Results!!! Let's hear/see 'em.
Alright. I'll be the first one to start.
The best dyno run for me out of 3 runs.
224.5 hp
169.8 lb/ft tq.
a/f was @ 11 constantly all thru 7k rpm then goes to 12 when it's at 8k.
Motor is stock. Stock boost @ 7psi on the Greddy kit with 2 1/4" piping all the way to the back plus the crappy FCU blue box.
It was a fun day. Met a lot of H-T'ers. I give you all props for showin' up. If anyone have pix, please post 'em as well.
[Modified by DB8GSR, 6:51 PM 3/16/2002]
[Modified by DB8GSR, 4:30 PM 3/17/2002]
The best dyno run for me out of 3 runs.
224.5 hp
169.8 lb/ft tq.
a/f was @ 11 constantly all thru 7k rpm then goes to 12 when it's at 8k.
Motor is stock. Stock boost @ 7psi on the Greddy kit with 2 1/4" piping all the way to the back plus the crappy FCU blue box.
It was a fun day. Met a lot of H-T'ers. I give you all props for showin' up. If anyone have pix, please post 'em as well.
[Modified by DB8GSR, 6:51 PM 3/16/2002]
[Modified by DB8GSR, 4:30 PM 3/17/2002]
#2
New User
Join Date: Jul 2001
Location: www.stevedemmitt.com, USA
Posts: 3,736
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (DB8GSR)
ok me 2nd
SOHC Turbo Civic Hatch @ 8.5psi (Greddy Powered)
best run was
172 whp
165 lb/ft tq.
and here is my dyno chart
ill post all my pics of the dyno meet in a bit
[Modified by RoaringTurtle, 3:37 AM 3/17/2002]
SOHC Turbo Civic Hatch @ 8.5psi (Greddy Powered)
best run was
172 whp
165 lb/ft tq.
and here is my dyno chart
ill post all my pics of the dyno meet in a bit
[Modified by RoaringTurtle, 3:37 AM 3/17/2002]
#4
New User
Join Date: Jul 2001
Location: www.stevedemmitt.com, USA
Posts: 3,736
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (speedaddict)
here are some pics from the dyno meet
Front of ATP
DB8GSR's Turbo GSR and a sleeper van next to it
Some cars outside
My car and a type r next to it
Integracon's B16 Turbo Integra
B20 Vtec
My car on the dyno
Friend's Sohc Turbo hatch
[Modified by RoaringTurtle, 4:23 AM 3/17/2002]
Front of ATP
DB8GSR's Turbo GSR and a sleeper van next to it
Some cars outside
My car and a type r next to it
Integracon's B16 Turbo Integra
B20 Vtec
My car on the dyno
Friend's Sohc Turbo hatch
[Modified by RoaringTurtle, 4:23 AM 3/17/2002]
#5
Honda-Tech Member
Join Date: Nov 2001
Location: TheNine2Five, Ca, USA
Posts: 1,213
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (DB8GSR)
Damn, gotta say I was disappointed- 179 @5psi and 191 @8psi. Well, I know I'm RICH up top 10.1 A/F at 8K, gotta 86 the CAT and 2.25" exhaust and B16/AUTO cams(After 7K my curve went downward) If someone with a VTEC/turbo could post their dyno's I'd like to see it to do a comparison. Anyways, good meeting you guys and CONGRATS to Ray-I still say GREDDY messed up and slipped RevHard parts in your greddy box, lol. Here's a pic of your dyno run RAY...
#6
New User
Join Date: Dec 2000
Location: RAIDER NATION, CA, USA
Posts: 6,415
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (integracon)
hey DB8GSR,
that your white integ? its clean. what type of rims are those? are those civic side skirts? hehe they dont look like stock integ side skirts. did alot of people show up? doesnt seem like there were many cars there. thought there would be more in the pictures.
that your white integ? its clean. what type of rims are those? are those civic side skirts? hehe they dont look like stock integ side skirts. did alot of people show up? doesnt seem like there were many cars there. thought there would be more in the pictures.
#7
Honda-Tech Member
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (DB8GSR)
Here are mine as well as an album I put together with all the pics I took.
My Dyno sheet is in there also.
http://www.imagestation.com/album/?i...65&mode=invite
98 ITR
With AEM CAI
AEM Adjustable cam gears(have not been tuned)
167.2 hp
117.5 Torque
Who's going to Solo2 Tomorrow ?
[Modified by 98401R, 8:27 AM 3/17/2002]
[Modified by 98401R, 8:49 AM 3/17/2002]
My Dyno sheet is in there also.
http://www.imagestation.com/album/?i...65&mode=invite
98 ITR
With AEM CAI
AEM Adjustable cam gears(have not been tuned)
167.2 hp
117.5 Torque
Who's going to Solo2 Tomorrow ?
[Modified by 98401R, 8:27 AM 3/17/2002]
[Modified by 98401R, 8:49 AM 3/17/2002]
Trending Topics
#8
BMW Güdentyte
Thread Starter
Join Date: Feb 2001
Location: 110 degrees heat wave, US
Posts: 1,722
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (98401R)
Nice pix guys!
Rob. I can't believe you still have the speed limiter on. 118mph.. yikes
I would expect the B20VTEC car would actually put out more tq than a normal B18NONVTEC, unfortunately, it didn't. Top end was a kick *** though.
dplay. Yah.. Everyone was spread out and others came late. I believe 15 cars that were dynoed including a new Cobra with an X pipe. Mean machine! But no Hondas reached 300hp because most of us had problems or were running on stock boost.
I'll scan my sheet later. Let's see some more dyno charts. Where'd all the Type R's go. Plenty of Type R peeps showed up.
Rob. I can't believe you still have the speed limiter on. 118mph.. yikes
I would expect the B20VTEC car would actually put out more tq than a normal B18NONVTEC, unfortunately, it didn't. Top end was a kick *** though.
dplay. Yah.. Everyone was spread out and others came late. I believe 15 cars that were dynoed including a new Cobra with an X pipe. Mean machine! But no Hondas reached 300hp because most of us had problems or were running on stock boost.
I'll scan my sheet later. Let's see some more dyno charts. Where'd all the Type R's go. Plenty of Type R peeps showed up.
#10
Honda-Tech Member
Join Date: Feb 2001
Location: Virginia
Posts: 1,745
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (Dc2k-specR)
wow..great turnout..i went there once with a bunch of other type Rs..here's mine on the dyno that day..my first time.
169. something whp with aem cai
169. something whp with aem cai
#12
Honda-Tech Member
iTrader: (3)
Join Date: Jan 2000
Location: Bloomington, IN, USA
Posts: 10,180
Likes: 0
Received 3 Likes
on
3 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (98ITR0884)
What other engine mods does your ITR have? I'm just wanting to compare with a friend's '01 ITR that ran a 165whp with just a Spoon foam filter.
#13
Honda-Tech Member
Join Date: Feb 2001
Location: Virginia
Posts: 1,745
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (IN VTEC)
What other engine mods does your ITR have? I'm just wanting to compare with a friend's '01 ITR that ran a 165whp with just a Spoon foam filter.
#15
New User
Join Date: Nov 2000
Location: Miami, FL, USA
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (IN VTEC)
Nice numbers Ray!!!! Big congrats, and it's time to step up to the next level muh man! Keep it up...
Nick
Nick
#17
BMW Güdentyte
Thread Starter
Join Date: Feb 2001
Location: 110 degrees heat wave, US
Posts: 1,722
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (B18CXr)
That's dustin's car. He's one of the mods here in H-T and I believe he has the max-rev exhaust mani. It's a very nice peace of metal and well constructed.
#18
New User
Join Date: Aug 2001
Location: San Jose, CA, 95132
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (DB8GSR)
I didn't dyno on saturday, but i got 239whp back in november or so..
civic si, greddy turbo, hondata, 10psi, stock fuel pump (hence the 13:1 a/f ratio)
civic si, greddy turbo, hondata, 10psi, stock fuel pump (hence the 13:1 a/f ratio)
#20
New User
Join Date: Dec 2000
Location: RAIDER NATION, CA, USA
Posts: 6,415
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (IN VTEC)
yo DB8GSR... what kind of rims you got there? they look clean... they 17s? and what type of sideskirts are they? look like some civic side skirts.
#22
New User
Join Date: Dec 2000
Location: RAIDER NATION, CA, USA
Posts: 6,415
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bay Area Dyno Results!!! Let's hear/see 'em. (DB8GSR)
dplaya. Click on my sig. You'll see every single mod I've got.
Thread
Thread Starter
Forum
Replies
Last Post
SpeedDreamz.com
Acura Integra
3
01-17-2004 08:26 PM
SpeedDreamz.com
Tech / Misc
3
01-15-2004 08:27 PM