B20 Turbo Dyno
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2001
Location: Northern, VA
Posts: 7,261
Likes: 0
Received 0 Likes
on
0 Posts
B20 Turbo Dyno
Some people have been IMing me about my dyno:
Kinda old, this was like almost 2 years ago when I was one of the few that had straight B20 Turbo @ ~ 10-11PSI.
Setup:
B20 Block, Stock B18B LS Head
Stock B20 Headgasket
JE Pistons 8.8:1 Compression
Eagle Rods
Garrett T3/T4e .63 A/R Exhaust, .60 A/R Compressor, Stage 2 Wheel
Inline Pro Manifold
2.25 Inch Downpipe
2.25 Inch Exhaust system
Fuel Management: (Ghetto Setup, but works )
Vortech FMU (8.0:1)
440 CC Injectors
S-AFC
I'll have some more dyno charts of my new toy soon (This time I'll be armed with Hondata! )... stay tuned!
Kinda old, this was like almost 2 years ago when I was one of the few that had straight B20 Turbo @ ~ 10-11PSI.
Setup:
B20 Block, Stock B18B LS Head
Stock B20 Headgasket
JE Pistons 8.8:1 Compression
Eagle Rods
Garrett T3/T4e .63 A/R Exhaust, .60 A/R Compressor, Stage 2 Wheel
Inline Pro Manifold
2.25 Inch Downpipe
2.25 Inch Exhaust system
Fuel Management: (Ghetto Setup, but works )
Vortech FMU (8.0:1)
440 CC Injectors
S-AFC
I'll have some more dyno charts of my new toy soon (This time I'll be armed with Hondata! )... stay tuned!
Trending Topics
#9
iTrader: (1)
Join Date: Nov 2001
Location: 43257 Osgood Rd. Fremont, CA 94539
Posts: 45,428
Likes: 0
Received 0 Likes
on
0 Posts
Re: B20 Turbo Dyno (-iLLuZioN-B18C1)
good stuff. how you like the motor with that turbo ? i got a B20 set up, bone stock on 14 psi with honda s200B on a T3super 60, 262 WHP and 254 torque, peak torque at 5500 RPM, but it falls of pretty dramatically aftetr that cuz the turbo is undersized.
#10
Re: B20 Turbo Dyno (Tein Man)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tein Man »</TD></TR><TR><TD CLASS="quote">Fuel Management: (Ghetto Setup, but works )
Vortech FMU (8.0:1)
440 CC Injectors
S-AFC
</TD></TR></TABLE>
What settings were you running on the AFC? The Hack doesn't work for me. I will eventually get Hondata, but right now I can get an FMU for cheap so I'd like to toy around with it. I'm just looking for a place to start from with the settings.
Vortech FMU (8.0:1)
440 CC Injectors
S-AFC
</TD></TR></TABLE>
What settings were you running on the AFC? The Hack doesn't work for me. I will eventually get Hondata, but right now I can get an FMU for cheap so I'd like to toy around with it. I'm just looking for a place to start from with the settings.
Thread
Thread Starter
Forum
Replies
Last Post
Ri5e
Hybrid / Engine Swaps
18
09-20-2002 06:54 PM