b18c or b20b for a TC job
#1
Thread Starter
Join Date: Jun 2003
Location: Singapore
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
b18c or b20b for a TC job
guys im new here so here's what i plan to du with me ride, hope u guys could help. rite now ive got 2 engines to werk on...
1) a b18c stock motor
2) a b20b with done up bottom end(billet conrods,tomei crank bolt,sleeved block
84mm) (heads port and polish wit all the retainers n valves upgraded)
Question is: which one shld i werk on and what kinda setup you guys could recommend me and if thres anything that i should upgrade even more. also can you guys recommend me a suitable turbo for the chosen setup.. thanks guys..
1) a b18c stock motor
2) a b20b with done up bottom end(billet conrods,tomei crank bolt,sleeved block
84mm) (heads port and polish wit all the retainers n valves upgraded)
Question is: which one shld i werk on and what kinda setup you guys could recommend me and if thres anything that i should upgrade even more. also can you guys recommend me a suitable turbo for the chosen setup.. thanks guys..
Thread
Thread Starter
Forum
Replies
Last Post