B16 Skunk2 Stage2 allmotor (s2s2) x B16a with a GT2871R @7.5psi Dynojet
07-21-2007, 03:48 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: Sao Paulo, SP, Brazil
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
B16 Skunk2 Stage2 allmotor (s2s2) x B16a with a GT2871R @7.5psi Dynojet
Continuation of my archived topic:
https://honda-tech.com/zerothread?id=2009665
Good news, went to dynojet few hours ago and with the B16a cams and 3 exhaust and one mufler I go 227whp, with 0,6bar I got 242whp.
The intercooler 29x11x3 will be installed next week!
S2S2T NA cams and B16aT both @ 0.5bar
http://img248.imageshack.us/im...2.jpg
0.5bar and 0.6bar with B16a cams
http://img516.imageshack.us/im...1.jpg
How much power gain I can expect from the Intercooler with the same boost?
Modified by gorpobr at 11:46 PM 7/21/2007
https://honda-tech.com/zerothread?id=2009665
Good news, went to dynojet few hours ago and with the B16a cams and 3 exhaust and one mufler I go 227whp, with 0,6bar I got 242whp.
The intercooler 29x11x3 will be installed next week!
S2S2T NA cams and B16aT both @ 0.5bar
http://img248.imageshack.us/im...2.jpg
0.5bar and 0.6bar with B16a cams
http://img516.imageshack.us/im...1.jpg
How much power gain I can expect from the Intercooler with the same boost?
Modified by gorpobr at 11:46 PM 7/21/2007
07-21-2007, 07:54 PM
#3
Honda-Tech Member
Join Date: Jan 2002
Location: st paul, mn
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16 Skunk2 Stage2 allmotor (s2s2) x B16a with a GT2871R @7.5psi Dynojet (gorpobr)
Thread
Thread Starter
Forum
Replies
Last Post
mannyman
Honda CRX / EF Civic (1988 - 1991)
22
02-22-2002 10:44 AM
