speedemon

i have a stock b16 and i plan on raising the rev limiter its at 7000 for now
i don't want to set it back up to 8300
do you think 8000 is safe with about 7 psi
thanks

swartz

as long as your car is tuned

Tchleung

I bounce my mtoor off the limter night and day at 8450 rpm stock b16 arp head studs. 10.5PSI SC34

93supercoupe

rev that thing, thats the only thing B16s got, put it back to stock limiter and beat it

boostismycrack

I was shifting my stock b16 bottom end @8500 rpm and 20 psi on an sc61 today with no problems. Although i don't recommend this for a daily driver or if u have any sense at all, but its possible cause i did it.

Tchleung

8500RPM is fine.. I rev miens to that everyday. I've even revved to 9000 a buncha times. Not sue how lnog it'll last me tho :d It's just a beater engine to get me by anyways hehe

speedemon

wow thanks guess ill raise it a little higher
ne one else that drives there car everyday what do you set it at

raene

My limiter is set at 8800 rpm. I shift at 8500 rpm during racing. Stock valves + springs.

B16Civic93

my shift light is set at 8000 and i shift there. its seen higher before, missing gears. but i dont like to let it sing much higher. i dont know how a motor with a stock 8200 rpm rev limitor could safely be reved much higher stock. that defeats the purpose of the rev limitor

richeybrooks

8500 for me stock everything mortat 10psi