Anyone in the NE interested in helpin me tune a car w/ Hondata?
#1
Honda-Tech Member
Thread Starter
Join Date: May 2003
Location: Redlight District, MA, USA
Posts: 1,471
Likes: 0
Received 0 Likes
on
0 Posts
Anyone interested in helpin me tune my Hondata?
What is a good amount of timing to pull (per lb of boost) while I tune the Fuel tables?
And what part of the ignition maps should i start putting timing back (and what is a decent increment... i.e. Hondata says 2% for fuel) after the fuel tables are tuned.
And can anyone verify a injector multiplier for me.....
440inj
b20 yurbo vtec (1995cc)
50lb fuel pressure
i think its .493 but if somone could just double check i'd appreciate it.
Modified by Ryan C at 11:29 PM 2/26/2004
And what part of the ignition maps should i start putting timing back (and what is a decent increment... i.e. Hondata says 2% for fuel) after the fuel tables are tuned.
And can anyone verify a injector multiplier for me.....
440inj
b20 yurbo vtec (1995cc)
50lb fuel pressure
i think its .493 but if somone could just double check i'd appreciate it.
Modified by Ryan C at 11:29 PM 2/26/2004
Thread
Thread Starter
Forum
Replies
Last Post