403whp / 280 Torque @ 20 psi Stock Block (No Sleeves) GSR
#3
Honda-Tech Member
Join Date: Jul 2004
Location: Carlisle, PA, united states
Posts: 1,557
Likes: 0
Received 0 Likes
on
0 Posts
Re: 403whp / 280 Torque @ 20 psi Stock Block (11psiTurboSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 11psiTurboSI »</TD></TR><TR><TD CLASS="quote">All I see is a X</TD></TR></TABLE>
diddo
diddo
#4
New User
Thread Starter
Join Date: Oct 2001
Location: Bayamon, P.R.
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: 403whp / 280 Torque @ 20 psi Stock Block (11psiTurboSI)
#6
Honda-Tech Member
Join Date: Mar 2003
Location: Victoria, BC, Canada
Posts: 751
Likes: 0
Received 0 Likes
on
0 Posts
Re: 403whp / 280 Torque @ 20 psi Stock Block (HybridHatch88)
Stock block as in stock internals? or just stock sleeves with forged stuff?
Nice numbers, whats the setup?
Nice numbers, whats the setup?
Trending Topics
#8
Honda-Tech Member
Join Date: Jun 2003
Location: skeet skeet
Posts: 1,046
Likes: 0
Received 0 Likes
on
0 Posts
Re: 403whp / 280 Torque @ 20 psi Stock Block (Blackack26)
nice #'s how about some info about the turbo set-up
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blackack26 »</TD></TR><TR><TD CLASS="quote">Stock block as in stock internals? or just stock sleeves with forged stuff?
Nice numbers, whats the setup? </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blackack26 »</TD></TR><TR><TD CLASS="quote">Stock block as in stock internals? or just stock sleeves with forged stuff?
Nice numbers, whats the setup? </TD></TR></TABLE>
#9
New User
Thread Starter
Join Date: Oct 2001
Location: Bayamon, P.R.
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: 403whp / 280 Torque @ 20 psi Stock Block (D-tuned)
Stock Sleeves with Forged Pistons and Rods
This is the setup
10.1 Forged Pistons
Peak Performance Forged Rods
T3/T4 .63/.70
3 Inch Exhaust
Microtech Fuel Management
stock cams
stock intake manifold
stock throttle body
This is the setup
10.1 Forged Pistons
Peak Performance Forged Rods
T3/T4 .63/.70
3 Inch Exhaust
Microtech Fuel Management
stock cams
stock intake manifold
stock throttle body
#17
New User
Thread Starter
Join Date: Oct 2001
Location: Bayamon, P.R.
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: 403whp / 280 Torque @ 20 psi Stock Block (11psiTurboSI)
The Blue Line Which is at Low Boost was on Pump Gas 93 Octane. The Red Line Was at High Boost and I just added 3 Gallons of 116 Octane Racing Gasoline.
Here's a pic of the Engine
Here's a pic of the Engine
#23
official honda whore
Join Date: Nov 2002
Location: not tellin you where, pa, usa
Posts: 8,454
Likes: 0
Received 0 Likes
on
0 Posts
Re: 403whp / 280 Torque @ 20 psi Stock Block (uptownrickyv)
nice, how many lbs was your high boost set at??? i would bet that you could make 400 on 93 octane......
#25
Guest
Posts: n/a
Re: (spoolin-ls)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoolin-ls »</TD></TR><TR><TD CLASS="quote">nice numbers! hope those sleeves don't crack...
</TD></TR></TABLE>
they wont as long as its tuned right...
</TD></TR></TABLE>
they wont as long as its tuned right...