3inches exhoust and 2.5 muffler ?
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: POLAND, POLAND
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
3inches exhoust and 2.5 muffler ?
i'm building b16a2 turbo and i ordered 3" muffler and they send me 2.5 on inlet side, i have
b16a2
ctr cams and springs
holset HY35
3" DP
3" exhoust
msd ignition etc.
my power goal is 400 and my question is - is it sens to use this 2.5 muffler when everything else is 3? will that effect my power goal?
or sell this one and buy 3?
b16a2
ctr cams and springs
holset HY35
3" DP
3" exhoust
msd ignition etc.
my power goal is 400 and my question is - is it sens to use this 2.5 muffler when everything else is 3? will that effect my power goal?
or sell this one and buy 3?
#7
Honda-Tech Member
Join Date: Apr 2009
Location: Arizona
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Re: 3inches exhoust and 2.5 muffler ?
Nah, i'd ditch the 2.5in exhaust and go ATLEAST 3in. 2.5in js don't cut it anymore. i'm selling my 3in Thermal R&D exhaust. in very good shape. fits all EK models if interested. in lots of ppl's opinions, it's the best 3in. exhaust ever made. Js make me an offer if interested. I'm gunna post it on here and hope it sells. GL with the exhaust and setup.
Trending Topics
#9
Junior Member
Join Date: Mar 2009
Location: Station in RI but from FL
Posts: 562
Likes: 0
Received 0 Likes
on
0 Posts
Re: 3inches exhoust and 2.5 muffler ?
I make decent power with my 2.5 but if i go to 3in I'll just ruin the piping. Reason being my car so low so I can't go any bigger without raising the car. Then again I run an open downpipe
Thread
Thread Starter
Forum
Replies
Last Post
MassScene
Forced Induction
3
04-09-2006 08:57 PM