300zx Turbo Mini-me Completed!
#1
Thread Starter
Join Date: Nov 2001
Location: Everett, Wa, usa
Posts: 1,486
Likes: 0
Received 0 Likes
on
0 Posts
300zx Turbo Mini-me Completed!
http://www.homemadeturbo.com/t3.html
Finished this project up last nite.. using a 300zx Turbo and a STD manifold.. this is the first non-dsm turbo I have used.. It pulls pretty damn good too.. Stock wastegate actuator is set right at 5.5psi..
alot of pics.. so be patient..
Jeff Frank
Finished this project up last nite.. using a 300zx Turbo and a STD manifold.. this is the first non-dsm turbo I have used.. It pulls pretty damn good too.. Stock wastegate actuator is set right at 5.5psi..
alot of pics.. so be patient..
Jeff Frank
#4
Honda-Tech Member
Join Date: Jul 2001
Location: New Jersey
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
Re: 300zx Turbo Mini-me Completed! (AbaZ)
Abaz, is that turbo water-cooled?? If so, u have that setup? I also have a t3 from a 300zx and plan to use it in my integra turbo set up. Thanks
#6
Honda-Tech Member
Join Date: Jul 2001
Location: New Jersey
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
Re: 300zx Turbo Mini-me Completed! (AbaZ)
Yup, its watercooled and oil cooled.. might be a bit small for a ls.. But I could be wrong.
#7
Junior Member
Join Date: Jan 2002
Location: Jopin, MO, United States
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Re: 300zx Turbo Mini-me Completed! (AbaZ)
Very very cool. I wish the salvage yards around here didn't suck so bad. They treat you like trash and sell junk for prices barely under brand new ones from the dealer....and don't EVEN ask to take a look around the yard if you need to find something for a custom project....okay enough ranting
I have really enjoyed all the homemadeturbo info
I have really enjoyed all the homemadeturbo info
Thread
Thread Starter
Forum
Replies
Last Post
jamesfawcett
Forced Induction
15
05-20-2009 11:13 AM