14b oil feed

Reply Subscribe

Thread Tools

Search this Thread

Jan 22, 2003 | 04:41 AM

BorderM3

Thread Starter

Honda-Tech Member

Joined: Jul 2002

Posts: 325

Likes: 0

From: Altoona, PA, USA

14b oil feed

I need a 12x1.25(metric) to -4an aeroquip/earls/etc to do the oil feed correctly to my turbo...

I cannot find this ANYWHERE...any ideas guys?

Jan 22, 2003 | 06:58 AM

BorderM3

Thread Starter

Honda-Tech Member

Joined: Jul 2002

Posts: 325

Likes: 0

From: Altoona, PA, USA

Re: 14b oil feed (BorderM3)

ttt

Jan 22, 2003 | 08:13 AM

mos

Honda-Tech Member

Joined: Sep 2002

Posts: 2,720

Likes: 0

From: 90210, CA, usa

Re: 14b oil feed (BorderM3)

You'll never find it. It's an odd metric thread that is not commonly used. I think 12m x 1.75 is the more standardized thread. You might be able to make one tho.

Jan 22, 2003 | 08:18 AM

JalopySiR

Honda-Tech Member

Joined: Oct 2001

Posts: 1,799

Likes: 0

From: of pure genius...

Re: 14b oil feed (BorderM3)

https://honda-tech.com/zerothread?id=375811

Jan 22, 2003 | 08:47 AM

BorderM3

Thread Starter

Honda-Tech Member

Joined: Jul 2002

Posts: 325

Likes: 0

From: Altoona, PA, USA

Re: 14b oil feed (JalopySiR)

thats 7/16 i dont see how that will work????plus 3 an

Jan 22, 2003 | 10:10 AM

0project dc2

iTrader: (1)

Joined: Nov 2001

Posts: 45,428

Likes: 0

From: 43257 Osgood Rd. Fremont, CA 94539

Re: 14b oil feed (BorderM3)

Quote:

thats 7/16 i dont see how that will work????plus 3 an

3-AN is sufficient for most turbo's, currently this oil feed set up is on my buddies 14B turbo and there are no leaks etcc, put some teflon on there and crank that suceker downadn no problems, thaere was no cross threading or anything like that.